Align T-Rex 450Pro DFC Super Combo

This is the Align T-Rex 450Pro DFC Super Combination. Align has actually paired the T-Rex 450Pro DFC with the redesigned 3GX Programmable Flybarless System, making this one astounding incredibly combo.

Align has actually established some of the most high-performance, premium helicopters in the industry. The brand name new Align T-Rex 450 Pro DFC Super Combination has a 400-size airframe and a performance level that's far beyond the equivalent size radiance helicopter.

Align has actually continued to set new requirements in both rate and quality. The new Align T-Rex 450 Pro DFC Super Combination continues with their requirements, which were very first established with its predecessor -the Align T-Rex 450. This new variation will provide you a huge amount of control in both precision flying and 3D maneuverability. The new variation of the T-Rex 450 integrates much of today's latest ingenious styles that have proven to be reliable and successful in the bigger Align helicopters.

3GX Programmable Flybarless System Features:

• New redesigned 3GX represents an entirely new generation of multi-function flybarless systems. The 3GX will dramatically improve your heli's performance.
• Currently the lightest and smallest flybarless system available on the marketplace.
• 2 ports so you can straight connect Spektrum and JR satellite receivers, along with full assistance of Futaba's S-BUS system.
• Based on the 3G FL760 manual setup process, the 3GX can be setup in as low as a couple of minutes. In addition, the 3GX can support all the CCPM swashplate systems that are currently available on the marketplace- consisting of 90, 120, 135, and 140 degree swashplates.
• Graphic illustrated directions on the computer system setup software application instructs you through a step by action setup process, giving you a fast  and painless setup time without omitting any steps.
• Supports Bluetooth connectivity- With the much expected and soon to be launched Bluetooth connectivity kit, the 3GX can be programmed (wireless) from a PC.
• Built in Align RCE-G600 guv function, so a external guv isn't required to lower electronic wire clutters.
• Custom parameters have been opened up in the 3GX to allow you to tweak a variety of settings for swashplate and rudder. Settings export feature permits customized settings to be shared with your friends.
• Utilizes brand name new gyroscope sensors, with the greatest requirements when compared to other flybarless systems currently on the marketplace. This permits it to be used under harsher than typical conditions. Its double axis plus rudder sensor dramatically enhances swashplate and rudder correction precision compared to last generation of 3G.
• Suitable for helicopter of all class from 250 to 800, radiance engine or electric powered.
• 3GX makes use of 16 bit processor, 4 times faster than the previous generation, along with entirely re-written firmware.
• With integrated in pirouette settlement function, the 3GX has the ability to stabilize your heli on a set point during pirouetting maneuvers.
• 3GX's rudder supplies consistent rudder feel, even under high speed conditions. This outstanding control feel will allow pilot of all skill levels to experience the best integration in between 3GX and helicopter.
• Support with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position in addition to altitude, as well as self-governing method point flights in addition to return home.

T-Rex 450Pro DFC Features:

• Equipped with DFC flybarless head assembly, giving you a very low CG style that decreases wind resistance, supplies more direct and exact flight control response and greater leading speed.
• New removable servo mounting block and main shaft block streamlines main shaft and servo maintenance.
• Integrated battery and ESC mounting platform, with adjustable battery position for the most optimum CG position.
• Vertical rudder servo install style for closer CG, and increases the sportiness of 3D flights.
• New and improved frame side plates with devoted 3GX mounting location streamlines total visual appeals and wire management.
• New style gyro mounting platform for included length.
• Highly rigid and light-weight carbon side plates.
• New style double point supported tail control assembly for slop free tail, improving on rudder resolution and control precision.
• Unique anti-centripetal force weight tail blade grips to improve rudder locking effect.
• Equipped with Align's brand name new MX series high effectiveness brushless motor.
• Highly efficient torque tube tail drive style, dramatically lower power loss discovered on belt owned system.
• Streamlined style canopy.
  

Includes:
One ALign T-Rex 450 PRO DFC Package set
One 3GX Flybarless System
One 325D 3G Carbon blades
One RCE-BL35P 35A Brushless ESC
One 450MX Brushless motor(3400KV)
One DS520 Digital servo
Three DS415M (Metal Gear)Digital servo

Requires:
Receiver(6-channel or more)
Pitch gaugeX1
11.1V 3S Li-Po 2000~2300mAh battery X1
Transmitter (6-channel or more,helicopter system)

Requirements:

3GX Programmable Flybarless System
Running Temperature: -10~60 degree
X and Y axis Operating Angle Variety: -300~+300 degree
Z axis Operating Angle Variety: -600~+600 degree
Size: 36.5x25.2x15.6 mm
Weight: 11g
Optimum working voltage: 8.5V

T-Rex 450Pro DFC
Length: 640mm
Height: 204mm
Main Rotor Diameter: 710mm
Tail Rotor Diameter: 158mm
Motor Drive Gear: 12T
Main Drive Gear: 121T
Autorotation Tail Drive Gear: 106T
Tail Drive Gear: 25T
Drive Gear Ratio: 1:10.08:4.24
Weight(w/o power system): 513g
Flying Weight: Approx. 638g