Align T-Rex 450Pro DFC Super Combo

This is the Align T-Rex 450Pro DFC Super Combo. Align has actually combined the T-Rex 450Pro DFC with the upgraded 3GX Programmable Flybarless System, making this one incredible incredibly combo.

Align has actually established some of the most high-performance, high-quality helicopters in the market. The brand brand-new Align T-Rex 450 Pro DFC Super Combo has a 400-size airframe and an efficiency level that's far beyond the comparable size radiance helicopter.

Align has actually continued to set brand-new requirements in both cost and quality. The brand-new Align T-Rex 450 Pro DFC Super Combo continues with their requirements, which were first established with its predecessor -the Align T-Rex 450. This brand-new variation will offer you a massive quantity of control in both precision flying and 3D maneuverability. The brand-new variation of the T-Rex 450 includes much of today's newest ingenious designs that have shown to be trustworthy and successful in the larger Align helicopters.

3GX Programmable Flybarless System Includes:

• New upgraded 3GX represents an entirely brand-new generation of multi-function flybarless systems. The 3GX will considerably improve your heli's performance.
• Currently the lightest and smallest flybarless system readily available on the marketplace.
• 2 ports so you can directly link Spektrum and JR satellite receivers, together with full assistance of Futaba's S-BUS system.
• Based on the 3G FL760 manual setup process, the 3GX can be setup in as little as a few minutes. Additionally, the 3GX can support all the CCPM swashplate systems that are currently readily available on the marketplace- including 90, 120, 135, and 140 degree swashplates.
• Graphic illustrated guidelines on the computer system setup software application advises you through a step by action setup process, offering you a fast  and painless setup time without leaving out any steps.
• Supports Bluetooth connectivity- With the much anticipated and quickly to be released Bluetooth connectivity package, the 3GX can be configured (cordless) from a PC.
• Built in Align RCE-G600 governor function, so a external governor isn't really required to lower electronic wire clutters.
• Custom parameters have been opened up in the 3GX to enable you to tweak a variety of settings for swashplate and rudder. Settings export function allows customized settings to be shown your friends.
• Utilizes brand brand-new gyroscope sensing units, with the highest requirements when compared with other flybarless systems currently on the marketplace. This allows it to be used under harsher than normal conditions. Its double axis plus rudder sensing unit considerably improves swashplate and rudder correction precision compared with last generation of 3G.
• Appropriate for helicopter of all class from 250 to 800, radiance engine or electric powered.
• 3GX uses 16 bit processor, 4 times faster than the previous generation, together with totally re-written firmware.
• With integrated in pirouette compensation function, the 3GX has the ability to support your heli on a fixed point during pirouetting maneuvers.
• 3GX's rudder provides constant rudder feel, even under high speed conditions. This outstanding control feel will enable pilot of all ability levels to experience the perfect combination in between 3GX and helicopter.
• Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self support, hold position in addition to elevation, and even self-governing way point flights in addition to return home.

T-Rex 450Pro DFC Functions:

• Equipped with DFC flybarless head assembly, offering you an extremely low CG style that reduces wind resistance, provides more direct and accurate flight control action and higher leading speed.
• New detachable servo mounting block and primary shaft block streamlines primary shaft and servo maintenance.
• Integrated battery and ESC mounting platform, with adjustable battery position for the most ideal CG position.
• Vertical rudder servo mount style for closer CG, and increases the sportiness of 3D flights.
• New and improved frame side plates with dedicated 3GX mounting area streamlines general aesthetics and wire management.
• New style gyro mounting platform for included length.
• Highly rigid and lightweight carbon side plates.
• New style double point supported tail control assembly for slop totally free tail, enhancing on rudder resolution and control precision.
• Unique anti-centripetal force weight tail blade grips to improve rudder locking effect.
• Equipped with Align's brand brand-new MX series high performance brushless motor.
• Highly effective torque tube tail drive style, considerably lower power loss discovered on belt owned system.
• Streamlined style canopy.
  

Includes:
One ALign T-Rex 450 PRO DFC Package set
One 3GX Flybarless System
One 325D 3G Carbon blades
One RCE-BL35P 35A Brushless ESC
One 450MX Brushless motor(3400KV)
One DS520 Digital servo
Three DS415M (Metal Gear)Digital servo

Needs:
Receiver(6-channel or more)
Pitch gaugeX1
11.1V 3S Li-Po 2000~2300mAh battery X1
Transmitter (6-channel or more,helicopter system)

Specs:

3GX Programmable Flybarless System
Running Temperature level: -10~60 degree
X and Y axis Operating Angle Range: -300~+300 degree
Z axis Operating Angle Range: -600~+600 degree
Size: 36.5x25.2x15.6 mm
Weight: 11g
Maximum working voltage: 8.5V

T-Rex 450Pro DFC
Length: 640mm
Height: 204mm
Main Rotor Diameter: 710mm
Tail Rotor Diameter: 158mm
Motor Drive Gear: 12T
Main Drive Gear: 121T
Autorotation Tail Own Gear: 106T
Tail Own Gear: 25T
Own Gear Ratio: 1:10.08:4.24
Weight(w/o power system): 513g
Flying Weight: Approximate. 638g