Align T-REX 450LP Dominator ARTF (AC)

Line up T-REX 450 has been the perfect option for entry level R/C helicopters. To accommodate new RC helicopter lovers, Align presented T-REX 450LP ARTF (Nearly Prepared to Fly)*, total with freshly launched Align A10 transmitter and Mini GRS flybarless system. This combination allows new lovers  to invest more time flying, instead of countless hours of guess work and building. 

The helicopter uses DFC (Direct Flight Control) rotor head, coupled with Mini GRS flybarless system enhanced for T-REX 450LP flight attributes. It supplies excellent stability appropriate for pilots of all levels.

Equipped with digital high voltage servo DS450 and DS455, supports 8.4 high voltage to provide ideal speed and torque efficiency. Paired with the new RCE-BL45P ESC, supports adjustable 5~8.4V BEC function to highly improve flight performance.

ALIGN A10 is AFHDS (Automatic Frequency Hopping Digital System) 2.4GHz transmitter supplied with 10 channels. The stick and holder are developed based upon ergonomic bringing much smoother control. Completed function with the mode of helicopter / airplane / multicopter. Rational and simple control interface, and simple to set up.

With the addition of the brand new Align A10 transmitter and Mini GRS, the T-REX 450LP ARTF pushes past the efficiency restriction of flybar helicopter, improving both on stability and 3D efficiency, while preserving a down to earth rate level.

1. Automatic Frequency Hopping Digital System, AFHDS is an extremely developed remote signal transmission system, providing long variety, lessening interference, with lower power consumption.
2. The frequency series of the system is 2.4055 ~ 2.475 GHz. The wave band is separated from 160 independent frequencies. The transmitter utilizes 16 different frequency and 160 different frequency hopping algorithms. Each time the transmitter is powered on a different frequency hopping scheme is utilized allowing the transmitter to avoid interference of the transmission signal.
3. Each transmitter has unique ID code when binding to the receiver, the receiver saves this unique ID code and only accepts a signal sent by the conserved ID code transmitter. This process avoids getting another transmitter signals and considerably boost the anti-interference capability and security.

A roll design slider is utilized to scroll through menu choices providing a quick setup.
20 models memory with either Chinese or English interface, three airplane choices (helicopter/airplane/multicopter), Modes 1-4 offered with optional instructions output, set buzzer cautions, and supported firmware upgrade.

Up to four electronic timmers. Ergonomic design for comfy feel and smoother control. The transmitter case is matte black with spined red control stays with give a unique, and stunning look.

This system utilizes a premium gain antenna covering the whole offered bandwidth. With high level of sensitivity receiver, the system can effectively avoid long-distance transmission signal interference.

Adopted low power ranked electronic devices and an extremely sensitive receiver chip. The transmitter frequency module utilizes an intermittent transmission signal to decrease transmission power and increase battery life drastically. Supplied charging port, simulator support, and firmware upgrade ability.

Equipped with the DFC flybarless head developed for very low CG to minimize wind resistance while providing an enhanced direct control feel. As a standard feature, the new primary rotor head block and spindle design is included. New developed 325 3D primary rotor blades are stable and agile resulting in improved flight efficiency for the newbie or 3D pilot.

Align has over 25 years of experience with motor core technical knowledge. Based upon 3s 11.1V the 460MX (3200KV) motor is particularly developed for the T-REX 450L Boss, featuring superior efficiency, high power output, severe torque, low current, and low operating temperature level. The 460MX motor shares the very same amazing engineering design includes as the 850MX Boss motor.

Three programmable throttle speed settings for fast throttle action control. Adjustable BEC output voltage (5~8.5V), auto power detection system appropriate for TWO~6S Li battery, a continues 3A current ranking, a burst ranking of 6A, constant current 45A and a surge current 60A for 15 seconds.

New CNC metal reinforcement primary frame brace is installed with the frame mounting bolts increasing the primary frame strength to improve flight stability for the newbie or the 3D pilot. The strong reinforcement of the frame is easily felt throughout severe 3D maneuvers. Also, the stylish look of red anodized and silver color frame brace improves the high-end look of the T-REX 450L.

Carbon primary frames uses composite combination technology to embed the battery mounting rails directly into the frames. This high-end production process permits the smart usage of open area in the frame body for a more rigid frame structure to improve flight efficiency. The T-REX 450L skillfully broadens on the core concepts of the T-REX 450Pro design to continue our design excellence.

Designed with direct to swash control, and a one-piece primary bearing block with integrated servo mounts for simplified servo installation is aesthetically pleasing. New dual bearing design DS450 servos minimize deadband and increase durability feature improved torque and speed.

1. Unique design for ALIGN small helicopters. It's light and simple.
2. Support the most recent new ALIGN A10 Radio (10-channel/A.BUS system) for the very best working operation.
3. Support T-REX 250/450/470/500 models, no have to setup, exceptional flight efficiency for the newbie or 3D pilot.
4. Support JR DSM2 and Spektrum DSM2/DSMX satellite. Integrated Futaba S-FHSS 2.4GHz support for Futaba S-FHSS transmitter.

 New sliding battery tray with locking system and frame integrated mounting rail supplies simple battery gain access to. The design likewise supplies extra battery security.

New anti-rotation guide with embedded anti-wear product to minimize the wear in between the swashplate long ball and the guide.

 Horizontal rudder servo mount developed for better center of mass (CG) to boost Newbie or 3D flying.

Consisted of tail boom support bridge to increase the rigidity of the overall tail boom to improve control.

 Brand new tail blade grips which utilize thrust bearings to improve rudder precision control while increasing the life of the bearings. New 65 mm tail rotor blades integrated with the 360mm primary rotor blades add to improved tail authority.

New dual tail sider support assembly for a slop free tail to improve rudder resolution and control.

 1. Appropriate for global Air Conditioner 100V~240V.
2. Voltage stabilizing charging appropriates for TWO 7.4V and THREE 11.1V lipo batteries.
3. Instantly correct out of balanced cells, and instantly charge cells with low voltage.
4. Auto-detected charge status display. (Red light: while charging Green light: end of charging)
5. Reverse polarity (caution beep) and built-in brief security.
6. Aluminum alloy shell with an internal cooling fan for effective heat dissipation.

1. Cells are examined to ensure matching cells are utilized throughout manufacturing to ensure high-performance battery production. The best option for the T-REX 450 helicopter series or other models such as airplanes and vehicles. 
2. Max Constant Discharge: 30C(66A), Burst Discharge: 40C(88A). Typical operating temperature level is approx. 40-65°C (within 80% of ranked discharge). Max. Temperature level: 80°C.

 Standard equipment

.A10 Transmitter x 1
.A6B Receiver x 1
.RCE-BL45P ESC x 1
.460MX Brushless motor(3200KV/2222) x 1
.DS450 Digital servo x 3
.DS455 Digital servo x 1
.MINIGRS Flybarless System x 1
.Balance Charger RCC-3SX x 1
.3S1P 11.1V 2200mAh/30C Battery x 1

MINIGRS Specification

.Running voltage variety: DC 3.5~8.4V
.Running current consumption: <100mA @ 4.8V
.Rotational detection rate: ±300°/sec
.Rudder yaw detection rate: ±600°/sec
.Sensor resolution: 12 BIT
.Swashplate Support: 120° CCPM Swashplate
.Mode Support: T-REX250, T-REX450, T-REX470, T-REX500
.Receiver Support: ALIGN A10(A.BUS), Futaba S-FHSS, DSM2/DSMX
.Operating temperature: -20? ~ 65?
.Operating humidity: 0% ~ 95%
.Comply with RoHS
.Size: 37.6x22.4x13mm       A10 Specification

       .Channel: 10-Channel
       .Available Models: helicopter/airplane/multicopter
       .Frequency range: 2.4055 ~ 2.475 GHz
       .Power: no higher than 20dBm
       .System Mode: 2.4G system AFHDS 2A
       .Suitable Voltage Range: 4.0 ~ 6.0V DC
       .Receiving Distance: the open ground no interference < 1000M
       .Low Voltate Warning: Lower than 4.2V
       .Weight: 487g (excluded battery)
       .Size: 187x89.6x215mmBalance Charger RCC-3SX Specification

.Input Voltage: AC 100V~240V(50/60Hz)
.Output Voltage: 2cell DC 7.4V / 3cell DC 11.1V
.Supported Battery Type: Li-polymer / Li-ion
.Charging Method: CC/CV
.Charging Current: 2A
.Size: 123x74.3x32mm
.Weight: 260gBattery Specification

.Output: 11.1V 2200mAh 24.4Wh(3S1P)
.Supports 5C charging
.Dimension: 104x36x22mm
.Weight: 165g 
.14AWG heat-resistant silicone rubber wire. Heat resistance: 200 ° C / Current withstand: 50A T-REX 450L Specification

.Length: 705mm
.Height: 205mm
.Width: 110mm
.Main Blade Lenght: 325mm
.Main Rotor Diameter: 734mm
.Tail Rotor Diameter: 171mm
.Motor Drive Gear: 11T
.Main Drive Gear: 121T
.Autorotation Tail Drive Gear: 106T
.Tail Drive Gear: 26T
.Drive Gear Ratio: 11:1:4.07
.Weight(w/o battery): 730gAccessories

.T-REX 450L Kit Set x 1 set
.MINIGRS Flybarless System x 1 set
.A10 Transmitter x 1
.325 Carbon Fiber Blades x 1 set
.RCE-BL45P ESC x 1
.460MX Brushless motor(3200KV/2222) x 1
.DS450 Digital servo x 3
.DS455 Digital servo x 1
.3S1P 11.1V 2200 mAh/30C Li-polymer Battery x 1
.Balance Charger RCC-3SX x 1 set
.1.5V AA Zinc-Carbon Battery x 4

Radio transmitter and electronic equipment required for assembly:
1.Dial Pitch Gauge or Digital Pitch Gauge 
2.Swashplate Leveler

*User is required to install tail assembly to the body of the helicopter and reconfirm set-up before flight.