Align T-REX 450 Plus DFC Super Combo RTF Helicopter DC Charger Version

This is the Align T-REX 450 Plus DFC Super Combo Ready-To-Fly Helicopter. The T-REX 450 has actually been a perfect choice for entry level R/C helicopter pilots for years. To cater to the next generation of enthusiasts, Align has actually established the Ready to Fly T-REX 450 PLUS DFC! The Align T6 2.4GHz transmitter and 3GX MR flybarless system are included with this totally assembled helicopter, allowing you to get the maker airborne faster than before by removing assembly and a majority of the setup procedure. The only additional devices that is needed to finish the assembly is a pitch gauge, swashplate leveler and a power supply for the battery charger. When those small setup processes are total, simply charge the included THREE battery with the included charger, and you're ready to fly!

The helicopter features the renown DFC rotor head assembly, coupled with the 3GX MR flybarless system that has actually been established to match the T-REX 450 PLUS flight characteristics, providing optimum stability for pilots of all levels. But, that does not imply that the 3GX MR does not have adjustability! Lovers that wish to fine tune the 3GX MR even further can do so by following a couple of easy actions. Furthermore, the 3GX MR has a FHSS 2.4GHz receiver built in, providing a space saving two-in-one package!

The Align T6 6-channel radio system system uses Futaba's 2.4GHz S-FHSS frequency hopping technology and features a complete variety of helicopter functions, such as throttle/pitch curve, stunt mode switch, double rate, rapid adjustment and more. The T-REX 450 PLUS DFC pushes past the efficiency constraints discovered with conventional flybar helicopters, providing rock strong stability and incredible 3D efficiency, while at the exact same time maintaining a down to earth price!

Features:

Factory assembled and tuned RTF version. Plug in a battery and experience immediate flight.
Align T6 Radio system uses Futaba 2.4GHz S-FHSS frequency hopping technology, with total helicopter functions & a 15 design memory.
Built in regular flight mode and stunt flight mode, with two action double rate settings.
Equipped with the low CG DFC rotor head, effectively reducing wind resistance during flight, providing the most direct and precise control feel back to the pilot.
Equipped with 3GX MR flybarless system, with built in FHSS 2.4GHz receiver function, for an easier and more direct setup, with settings enhanced for the T-Rex 450 Plus DFC.
Four piece frame plate style with anchored servo mounting platform for quick servo install/removal without mounting nuts.
Narrow lower frame plate and base plate style enhances strength, rigidity and agility.
Specially developed between frame rudder servo install for central CG place for improved 3D flying, while decreasing crash damages to rudder servo.
Equipped with MX series high efficiency brushless motor, with considerably improved cooling efficiency for excellent power output.
Equipped with REC-BL35P brushless controller including step-less adjustable BEC voltage in between 5V to 6V.
Devoted rudder gyro mounting platform to separate vibration from the tail, improving gyro performance.
Re-designed battery mounting platform with incorporated ESC install for structured electronics mounting.
High precision tail pitch control assembly with visually pleasing and functional design.
Weighted tail blade grips effectively increases smoothness of rudder pitch action.
Aerodynamic canopy airbrushed with vibrant graphics.
Includes THREE 2200mAh 30C lithium polymer battery and balance charger.
3GX MR Requirements:

Running Temperature level: -10~60 degree

Appropriate Voltage Range: DC 3.5~8.4V

Running existing consumption: <100mA @4.8V

Operating humidity: 0%~95%

RoHS certified: Yes

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 37.4x20.5x12.6mm

Weight: 9g

450 Plus Specifications:

Length: 634mm

Height: 202mm

Main Rotor Diameter: 715mm

Tail Rotor Diameter: 158mm

Motor Drive Gear: 11T

Main Drive Gear: 112T

Autorotation Tail Drive Gear: 106T

Tail Drive Gear: 25T

Drive Gear Ratio: 1:10:4.24

Flying Weight: Approx. 584g

Includes:

(1) T-REX 450 Plus DFC Kit
(1) 3GX MR Flybarless System
(1) ALIGN T6 6-Channel Transmitter
(1) 325D 3G Carbon blades set
(1) RCE-BL35P 35A Brushless ESC
(1) 450MX Brushless motor (3400kV)
(3) DS415M Metal Gear Digital servos
(1) DS425M Digital servo
(1) 3S1P 11.1V 2200mAh/30C Li-polymer Battery
(1) RCC-3SD DC Lithium Battery Balance Charger
(4) 1.5V AA Zinc-Carbon Batteries
Needed to Complete:

Pitch gauge
Swashplate leveler
Power supply (For battery charger)