Align T-REX 450 Plus DFC Super Combo BTF

Guideline:
T-REX 450 has been the perfect option for entry level R/C helicopters and T-REX 450 PLUS is developed for newbies. The completely assembled helicopter can be flown instantly just by plugging in a charged battery, enabling the pilot to bypass assembly and change procedure. This T-REX 450 PLUS DFC is a helicopter that using flybarless system.
The helicopter makes use of DFC rotor head assembly, paired with 3GX MR flybarless system optimized for T-REX 450 PLUS flight qualities. Without any change or tuning, this combo will offer ideal stability ideal for pilots of all levels.
For those enthusiasts who wish to fine tune 3GX MR even further, it can be done through a couple of simple steps. In addition, 3GX MR has a FHSS 2.4GHz receiver integrated in, offering an all in one plan.
With the addition of the brand name brand-new 3GX MR, the T-REX 450 PLUS DFC pushes past the performance constraint of flybar helicopter, enhancing both stability and 3D performance, while preserving a down to earth rate level

Instructions:(T-REX 450 Plus DFC BTF)
T-REX 450 PLUS DFC BTF（Bind To Fly）complete plan was assembled and tuned at the factory. Need to use S-FHSS system transmitter to bind and fly. Assistance Futaba S-FHSS system.
Geared up with the low CG DFC rotor head, successfully reduce wind resistance during flight, offering the most direct and accurate control feel back to the pilot, and shows thrilling 3D performance and unimaginable flight speed.
Geared up with recently launched 3GX MR flybarless system, with FHSS 2.4GHz receiver for integrated in receiver function, for easier and more direct setup, with setting optimized for T-Rex 450 Plus DFC, resulting in more steady and more preferable control feel than before.
Four piece frame plate style with imbedded servo installing platform for quick servo install/removal without installing nuts.
Narrow lower frame plate and base plate style to enhance rigidness and enhance flight agility.
Specifically developed between frame rudder servo install for centralized CG area to benefit 3D flying, while minimizing crash damages to rudder servo
Geared up with MX series high performance brushless motor, with considerably enhanced cooling performance for excellent power output.
Geared up with brand-new design REC-BL35P brushless controller including step-less adjustable BEC voltage in between 5V to 6V .
Devoted rudder gyro installing platform to isolate vibration from tail transmission, enhancing gyro performance.
Newly developed battery installing platform with incorporated ESC install for streamlined installing of electronic devices.
High accuracy tail pitch control assembly with visually pleasing and practical style. Weighted tail blade grips successfully increases smoothness of rudder pitch action.
Brand-new design aerodynamic canopy airbrushed with vibrant graphics.

Users should have a specific concept of security to run the R/C helicopters.
Be sure to read and abide by associated safety notes of instruction manual before flying.

Specification(3GX MR):
Running Temperature level:-10~60 degree
Suitable Voltage Variety:DC 3.5~8.4V
Operating present usage:<100mA @4.8V
Operating humidity:0%~95%
RoHS certified
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Size:37.4x20.5x12.6 mm Size
Weight:9g Weight

Specification:(T-REX 450 Plus DFC BTF):
Length: 634mm
Height: 205mm
Main Rotor Diameter: 715mm
Tail Rotor Diameter: 158mm
Motor Drive Gear: 11T
Main Drive Gear: 112T
Autorotation Tail Drive Gear: 106T
Tail Drive Gear: 25T
Drive Gear Ratio: 1:10:4.24
Flying Weight: Approx. 584g
Color carton:27.3x10x6.6cm
Outer carton:56x31x28cm ,24sets/ctn

Accessories:
T-REX 450 Plus DFC Kit Set X1 set
3GX MR Flybarless System X1 set
325D 3G Carbon blades X1set
RCE-BL35P 35A Brushless ESC X1
450MX Brushless motor(3400KV) X1
DS415M (Metal Gear)Digital servoX3
DS425MDigital servoX1

Radio transmitter and electronic equipment required for assembly:
1.Dial Pitch Gauge or Digital Pitch Gauge
2.Swashplate Leveler
3.3S1P 11.1V 2200 mAh/30C Li-polymer Battery x 1
4.ALIGN T6 of Futaba S-FHSS 2.4G Transmitter x 1