Align T-REX 450 PLUS DFC RTF (DC)

Will be offered quickly.



















Information:
T-REX 450 has been the ideal option for entry level R/C helicopters. To cater to the beginner enthusiasts, Align initially introduced RTF (Ready to Fly) T-REX 450 PLUS DFC. Now, Align presents a new flybarless version:T-REX 450 PLUS DFC. Total with Align T6 2.4G transmitter and recently released 3GX MRS flybarless system, this completely assembled helicopter can be flown immediately simply by plugging in a charged battery, enabling the pilot to bypass assembly and change procedure.
The helicopter makes use of DFC rotor head assembly, coupled with 3GX MRS flybarless system optimized for T-REX 450 PLUS flight attributes. Without any change or tuning, this combination will supply optimum stability ideal for pilots of all levels.
For those enthusiasts who wish to fine tune 3GX MRS even further, it can be done through a few basic actions. In addition, 3GX MRS has a FHSS 2.4GHz receiver built in, providing an all in one plan.
Line up T6 R/C system makes use of Futaba 2.4G S-FHSS frequency hopping 6 channel transmitter, with total helicopter functions such as throttle/pitch curve, stunt mode switch, dual rate and rapid change, and so on
With the addition of the brand brand-new 3GX MRS, the T-REX 450 PLUS DFC pushes past the performance limitation of flybar helicopter, enhancing both stability and 3D performance, while preserving a down to earth cost level.

3GX MRS Programmable Flybarless System Information:
3GX MRS's was designed with objectives of basic, convenient, light, and ease of change. With the ingrained brand brand-new Futaba S-FHSS 2.4Ghz system/JR DSM2 and Spektrum DSM2/DSMX ,the 3GX MRS is more than simply a flybarless system; it streamlines installation on small/micro sized helicopters because no receiver is needed. Its established is exceptionally instinctive simplicity, simply requires a few actions can easily complete the 3GX MRS change. Enhanced for T-Rex 250,T-Rex 450 and T-Rex 500 flybarless helicopters, with factory default setting, constant flying performance ideal for bulk of pilots dealing with feel. In basic terms, the 3GX MRS provides pilots a more economical and dependable alternative.
Spektrum and JR Satellite receivers support (Replaces original factory receiver)
Built in Futaba S-FHSS 2.4Ghz receiver, straight compatible with Align T6 and Futaba S-FHSS transmitters.
Flybarless system designed particularly for T-Rex 250, T-Rex 450 and T-Rex 500, with small footprint, simplified setting procedure.
Enhanced for T-Rex 250 , T-Rex 450 and T-Rex 500helicopters; with factory default setting ideal for bulk of pilots.
Usage for T-REX 250/T-REX 450/T-REX 500.

3GX MRS Programmable Flybarless System:
Suitable Voltage Range:DC 3.5~8.4V
Operating current intake:<100mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12 BIT
Operating Temperature:-20~65 degree
Operating humidity:0%~95%
RoHS certified
Size:37.6x22.4x13 mm Size
Weight: 10g Weight
Compatible with T-REX 250、T-REX 450 and T-REX 500

Specification:
Length: 634mm
Height: 205mm
Main Rotor Diameter: 715mm
Tail Rotor Diameter: 158mm
Motor Drive Gear: 11T
Main Drive Gear: 112T
Autorotation Tail Drive Gear: 106T
Tail Drive Gear: 25T
Drive Gear Ratio: 1:10:4.24
Flying Weight: Approx. 584g
Color carton:27.3x10x6.6cm
Outer carton:56x31x28cm ,24sets/ctn

Accessories:
T-REX 450 Plus DFC Kit Set x 1 set
3GX MRS Flybarless System x 1 set
ALIGN T6 6Channel Transmitter x 1
325 Carbon Fiber Blades-Blue x 1 set
RCE-BL35P 35A Brushless ESC x 1
450MX Brushless motor(3400KV) x 1
DS416M(Metal Gear)Digital servo x 3
DS425M Digital servo x 1
3S1P 11.1V 2200 mAh/30C Li-polymer Battery x 1
Lithlum Battery Balance Charger RCC-3SD x 1 set
1.5V AA Zinc-Carbon Battery x 4

Radio transmitter and electronic equipment required for assembly:
1.Dial Pitch Gauge or Digital Pitch Gauge
2.Swashplate Leveler

Please Click here for Setup Manual3GX MRS

Please Click here for Setup Manual3GX MR

Please Click here for Align 3GX MRS Binding Process with Futaba S FHSS

Please Click here for Align 3GX MRS Model Selection and Binding Process for Spektrum