Align T-REX 450 PLUS DFC RTF (AC)

Information:
T-REX 450 has been the perfect choice for entry level R/C helicopters. To cater to the newbie lovers, Align initially presented RTF (Prepared to Fly) T-REX 450 PLUS DFC. Now, Align provides a brand-new flybarless version:T-REX 450 PLUS DFC. Complete with Align T6 2.4G transmitter and newly released 3GX MRS flybarless system, this completely assembled helicopter can be flown instantly simply by plugging in a charged battery, allowing the pilot to bypass assembly and modification procedure.
The helicopter uses DFC rotor head assembly, coupled with 3GX MRS flybarless system enhanced for T-REX 450 PLUS flight characteristics. With no modification or tuning, this combo will offer ideal stability appropriate for pilots of all levels.
For those lovers who wish to fine tune 3GX MRS even further, it can be done through a few simple actions. In addition, 3GX MRS has a FHSS 2.4GHz receiver built in, providing an all in one package.
Line up T6 R/C system uses Futaba 2.4G S-FHSS frequency hopping 6 channel transmitter, with complete helicopter functions such as throttle/pitch curve, stunt mode switch, double rate and exponential modification, etc.
With the addition of the brand brand-new 3GX MRS, the T-REX 450 PLUS DFC pushes past the performance restriction of flybar helicopter, enhancing both stability and 3D performance, while preserving a down to earth price level.

3GX MRS Programmable Flybarless System Information:
3GX MRS's was developed with objectives of simple, hassle-free, light, and ease of modification. With the embedded brand brand-new Futaba S-FHSS 2.4Ghz system/JR DSM2 and Spektrum DSM2/DSMX ,the 3GX MRS is more than simply a flybarless system; it simplifies installation on small/micro sized helicopters since no receiver is required. Its established is extremely instinctive simpleness, simply requires a few actions can quickly complete the 3GX MRS modification. Optimized for T-Rex 250,T-Rex 450 and T-Rex 500 flybarless helicopters, with factory default setting, constant flying performance appropriate for bulk of pilots dealing with feel. In simple terms, the 3GX MRS offers pilots a more affordable and dependable alternative.
Spektrum and JR Satellite receivers support (Replaces original factory receiver)
Integrated in Futaba S-FHSS 2.4Ghz receiver, straight suitable with Align T6 and Futaba S-FHSS transmitters.
Flybarless system developed particularly for T-Rex 250, T-Rex 450 and T-Rex 500, with little footprint, simplified setting procedure.
Optimized for T-Rex 250 , T-Rex 450 and T-Rex 500helicopters; with factory default setting appropriate for bulk of pilots.
Use for T-REX 250/T-REX 450/T-REX 500.

3GX MRS Programmable Flybarless System:
Appropriate Voltage Range:DC 3.5~8.4V
Running current consumption:<100mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12 BIT
Operating Temperature:-20~65 degree
Operating humidity:0%~95%
RoHS certified
Size:37.6x22.4x13 mm Size
Weight: 10g Weight
Compatible with T-REX 250、T-REX 450 and T-REX 500

Specification:
Length: 634mm
Height: 205mm
Main Rotor Diameter: 715mm
Tail Rotor Diameter: 158mm
Motor Drive Gear: 11T
Main Drive Gear: 112T
Autorotation Tail Drive Gear: 106T
Tail Drive Gear: 25T
Drive Gear Ratio: 1:10:4.24
Flying Weight: Approx. 584g
Color carton:27.3x10x6.6cm
Outer carton:56x31x28cm ,24sets/ctn

Accessories:
T-REX 450 Plus DFC Kit Set x 1 set
3GX MRS Flybarless System x 1 set
ALIGN T6 6Channel Transmitter x 1
325 Carbon Fiber Blades-Blue x 1 set
RCE-BL35P 35A Brushless ESC x 1
450MX Brushless motor(3400KV) x 1
DS416M(Metal Gear)Digital servo x 3
DS425M Digital servo x 1
3S1P 11.1V 2200 mAh/30C Li-polymer Battery x 1
Lithlum Battery Balance Charger RCC-3SX x 1 set
1.5V AA Zinc-Carbon Battery x 4

Radio transmitter and electronic equipment required for assembly:
1.Dial Pitch Gauge or Digital Pitch Gauge
2.Swashplate Leveler

Please Click here for Setup Manual3GX MRS

Please Click here for Setup Manual3GX MR

Please Click here for Align 3GX MRS Binding Process with Futaba S FHSS

Please Click here for Align 3GX MRS Model Selection and Binding Process for Spektrum