Align T-Rex 450 Aluminum Case

This is the T-Rex aluminum case for the Trex 450SA, 450XL and 450SE electric RC helicopters. This case has the Align logo design on the front with the words "Conquer your heart". The case holds the built Trex, radio and electronic devices with space for whatever little additionals you want to add. Outdoors measurements are 698x203x284mm (27.5x8x11.2 inches).

Below is another product that praises the product being discussed.




Functions



Consists of 24-inch remote receiver extensionReplacement remote receiver for DSMX® receivers that utilize a remote receiverOptional Second remote receiver for the AR9010 receiver or 4th remote receiver for the AR9110




Introduction


The remote receiver can be used as a replacement for any DSMX receiver that makes use of a remote receiver. It can likewise be used as an optional 2nd remote receiver for the AR9010 or fourth remote receiver for the AR9110.
The remote receiver consists of one 24-inch extension; however, different lengths of receiver extensions can be acquired allowing different positioning choices for mounting functions. Extra remote receiver extensions are offered in 6", 9", 12", 24" and 36" lengths.
Always purchase items from a Horizon Pastime, Inc. authorized dealership to ensure genuine top quality Spektrum product. Horizon Pastime, Inc. disclaims all support and service warranty with relates to, but not restricted to, compatibility and performance of fake items or items declaring compatibility with DSM2, DSMX or Spektrum.
Attention: Horizon Pastime has confirmed that Spektrum Products being sold by KoKo Technology are fake.  We consider it a threat to use these items, waive all liability and will not support any service warranty or service in concerns to them.








Specifications


Type: DSMX Remote Receiver
Modulation: DSMX
Band: 2.4GHz
Length: 0.98 in (25mm)
Width: 0.89 in (23mm)
Height: 0.27 in (6.9mm)





Media Gallery





 View Image Gallery






Articles, Reviews, and Links




 Antenna Positioning When Utilizing Remote Receivers

This product praises the main item right here.

T-Rex 450Pro DFC Super Combo

This is the Align T-Rex 450Pro DFC Super Combo. Align has matched the T-Rex 450Pro DFC with the revamped 3GX Programmable Flybarless System, making this one unbelievable incredibly combo.

Align has developed some of the most high-performance, top quality helicopters in the market. The brand name brand-new Align T-Rex 450 Pro DFC Super Combo has a 400-size airframe and an efficiency level that's far beyond the comparable size glow helicopter.

Align has continued to set brand-new requirements in both rate and quality. The brand-new Align T-Rex 450 Pro DFC Super Combo continues with their requirements, which were first established with its predecessor -the Align T-Rex 450. This brand-new version will offer you a huge amount of control in both accuracy flying and 3D maneuverability. The brand-new version of the T-Rex 450 incorporates a number of today's latest ingenious designs that have proven to be reliable and successful in the bigger Align helicopters.

3GX Programmable Flybarless System Features:

• New revamped 3GX represents a completely brand-new generation of multi-function flybarless systems. The 3GX will dramatically improve your heli's performance.
• Currently the lightest and tiniest flybarless system offered on the market.
• 2 ports so you can directly connect Spektrum and JR satellite receivers, together with complete support of Futaba's S-BUS system.
• Based on the 3G FL760 manual setup procedure, the 3GX can be setup in as low as a few minutes. Additionally, the 3GX can support all of the CCPM swashplate systems that are currently offered on the market- consisting of 90, 120, 135, and 140 degree swashplates.
• Graphic showed guidelines on the computer system setup software advises you through a step by step setup procedure, offering you a quick  and pain-free setup time without leaving out any steps.
• Supports Bluetooth connectivity- With the much anticipated and quickly to be launched Bluetooth connectivity kit, the 3GX can be programmed (wireless) from a PC.
• Built in Align RCE-G600 governor function, so a external governor isn't really required to reduce electronic wire clutters.
• Custom specifications have been opened up in the 3GX to permit you to fine tune a range of settings for swashplate and rudder. Settings export feature permits custom-made settings to be shown your friends.
• Utilizes brand name brand-new gyroscope sensors, with the greatest specs when compared with other flybarless systems currently on the market. This permits it to be used under harsher than typical conditions. Its double axis plus rudder sensor dramatically improves swashplate and rudder correction accuracy compared with last generation of 3G.
• Suitable for helicopter of all class from 250 to 800, glow engine or electric powered.
• 3GX makes use of 16 bit processor, 4 times faster than the previous generation, together with totally re-written firmware.
• With built in pirouette payment function, the 3GX is able to stabilize your heli on a set point during pirouetting maneuvers.
• 3GX's rudder supplies constant rudder feel, even under high speed conditions. This excellent control feel will permit pilot of all skill levels to experience the ideal integration in between 3GX and helicopter.
• Support with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position in addition to altitude, and even autonomous method point flights in addition to return house.

T-Rex 450Pro DFC Functions:

• Geared up with DFC flybarless head assembly, offering you an exceptionally low CG design that decreases wind resistance, supplies more direct and exact flight control response and greater top speed.
• New detachable servo mounting block and primary shaft block streamlines primary shaft and servo maintenance.
• Integrated battery and ESC mounting platform, with adjustable battery position for the most optimal CG position.
• Vertical rudder servo install design for closer CG, and increases the sportiness of 3D flights.
• New and improved frame side plates with dedicated 3GX mounting area streamlines total looks and wire management.
• New style gyro mounting platform for included length.
• Highly stiff and lightweight carbon side plates.
• New style double point supported tail control assembly for slop free tail, improving on rudder resolution and control precision.
• Unique anti-centripetal force weight tail blade grips to improve rudder locking effect.
• Equipped with Align's brand name brand-new MX series high efficiency brushless motor.
• Highly efficient torque tube tail drive design, dramatically reduce power loss discovered on belt driven system.
• Streamlined design canopy.
  

Consists of:
One ALign T-Rex 450 PRO DFC Package set
One 3GX Flybarless System
One 325D 3G Carbon blades
One RCE-BL35P 35A Brushless ESC
One 450MX Brushless motor(3400KV)
One DS520 Digital servo
3 DS415M (Metal Gear)Digital servo

Needs:
Receiver(6-channel or more)
Pitch gaugeX1
11.1V 3S Li-Po 2000~2300mAh battery X1
Transmitter (6-channel or more,helicopter system)

Specifications:

3GX Programmable Flybarless System
Running Temperature level: -10~60 degree
X and Y axis Operating Angle Variety: -300~+300 degree
Z axis Operating Angle Variety: -600~+600 degree
Size: 36.5x25.2x15.6 mm
Weight: 11g
Optimum working voltage: 8.5V

T-Rex 450Pro DFC
Length: 640mm
Height: 204mm
Main Rotor Size: 710mm
Tail Rotor Size: 158mm
Motor Drive Gear: 12T
Main Drive Gear: 121T
Autorotation Tail Drive Gear: 106T
Tail Drive Gear: 25T
Drive Gear Ratio: 1:10.08:4.24
Weight(w/o power system): 513g
Flying Weight: Approximate. 638g