Align T-Rex 450 Aluminum Case

This is the T-Rex aluminum case for the Trex 450SA, 450XL and 450SE electric RC helicopters. This case has the Align logo design on the front with the words "Dominate your heart". The case holds the developed Trex, radio and electronic equipment with space for whatever little additionals you want to include. Outdoors measurements are 698x203x284mm (27.5x8x11.2 inches).

Right here is an additional item that praises the item being reviewed.




Features



Includes 24-inch remote receiver extensionReplacement remote receiver for DSMX® receivers that make use of a remote receiverOptional Second remote receiver for the AR9010 receiver or 4th remote receiver for the AR9110




Summary


The remote receiver can be utilized as a replacement for any DSMX receiver that makes use of a remote receiver. It can likewise be utilized as an optional second remote receiver for the AR9010 or fourth remote receiver for the AR9110.
The remote receiver includes one 24-inch extension; nevertheless, different lengths of receiver extensions can be acquired allowing different positioning alternatives for installing purposes. Additional remote receiver extensions are readily available in 6", 9", 12", 24" and 36" lengths.
Always purchase items from a Horizon Pastime, Inc. authorized dealer to guarantee genuine top quality Spektrum product. Horizon Pastime, Inc. disclaims all support and warranty with regards, but not restricted to, compatibility and performance of fake items or items asserting compatibility with DSM2, DSMX or Spektrum.
Attention: Horizon Pastime has actually validated that Spektrum Products being offered by KoKo Innovation are fake.  We consider it a risk to use these items, waive all liability and will not support any warranty or service in regards to them.








Requirements


Type: DSMX Remote Receiver
Modulation: DSMX
Band: 2.4GHz
Length: 0.98 in (25mm)
Width: 0.89 in (23mm)
Height: 0.27 in (6.9mm)





Media Gallery





 View Image Gallery






Articles, Reviews, and Hyperlinks




 Antenna Positioning When Utilizing Remote Receivers

This item praises the main item below.

T-Rex 450Pro DFC Super Combo

This is the Align T-Rex 450Pro DFC Super Combination. Align has actually paired the T-Rex 450Pro DFC with the upgraded 3GX Programmable Flybarless System, making this one amazing super combo.

Align has actually established a few of the most high-performance, top quality helicopters in the market. The brand new Align T-Rex 450 Pro DFC Super Combination has a 400-size airframe and an efficiency level that's far beyond the comparable size glow helicopter.

Align has actually continued to set new requirements in both rate and quality. The new Align T-Rex 450 Pro DFC Super Combination continues with their requirements, which were first developed with its predecessor -the Align T-Rex 450. This new variation will give you an enormous quantity of control in both accuracy flying and 3D maneuverability. The new variation of the T-Rex 450 incorporates a lot of today's newest ingenious designs that have proven to be reputable and successful in the larger Align helicopters.

3GX Programmable Flybarless System Features:

• New upgraded 3GX represents a totally new generation of multi-function flybarless systems. The 3GX will dramatically improve your heli's performance.
• Currently the lightest and smallest flybarless system readily available on the market.
• 2 ports so you can straight connect Spektrum and JR satellite receivers, together with complete support of Futaba's S-BUS system.
• Based on the 3G FL760 manual setup process, the 3GX can be setup in as little as a couple of minutes. In addition, the 3GX can support all the CCPM swashplate systems that are presently readily available on the market- consisting of 90, 120, 135, and 140 degree swashplates.
• Graphic illustrated guidelines on the computer system setup software application advises you through an action by action setup process, giving you a quick  and painless setup time without leaving out any steps.
• Supports Bluetooth connectivity- With the much awaited and soon to be released Bluetooth connectivity kit, the 3GX can be configured (wireless) from a PC.
• Built in Align RCE-G600 guv function, so a external guv isn't required to lower electronic wire clutters.
• Custom parameters have been opened up in the 3GX to allow you to fine tune a variety of settings for swashplate and rudder. Settings export feature allows custom settings to be shown your friends.
• Utilizes brand new gyroscope sensors, with the highest specs when compared with other flybarless systems presently on the market. This allows it to be utilized under harsher than typical conditions. Its double axis plus rudder sensor dramatically improves swashplate and rudder correction accuracy compared with last generation of 3G.
• Suitable for helicopter of all class from 250 to 800, glow engine or electric powered.
• 3GX makes use of 16 bit processor, 4 times faster than the previous generation, together with entirely re-written firmware.
• With built in pirouette payment function, the 3GX has the ability to support your heli on a fixed point during pirouetting maneuvers.
• 3GX's rudder supplies consistent rudder feel, even under high speed conditions. This excellent control feel will allow pilot of all ability levels to experience the perfect combination in between 3GX and helicopter.
• Support with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self support, hold position along with elevation, as well as self-governing way point flights along with return home.

T-Rex 450Pro DFC Features:

• Geared up with DFC flybarless head assembly, giving you a very low CG design that reduces wind resistance, supplies more direct and precise flight control reaction and higher top speed.
• New detachable servo installing block and main shaft block simplifies main shaft and servo maintenance.
• Integrated battery and ESC installing platform, with adjustable battery position for the most optimal CG position.
• Vertical rudder servo mount design for closer CG, and increases the sportiness of 3D flights.
• New and improved frame side plates with devoted 3GX installing place simplifies general visual appeals and wire management.
• New design gyro installing platform for added length.
• Highly rigid and light-weight carbon side plates.
• New design double point supported tail control assembly for slop free tail, enhancing on rudder resolution and control precision.
• Unique anti-centripetal force weight tail blade grips to improve rudder locking effect.
• Equipped with Align's brand new MX series high performance brushless motor.
• Highly effective torque tube tail drive design, dramatically lower power loss found on belt driven system.
• Streamlined design canopy.
  

Includes:
One ALign T-Rex 450 PRO DFC Kit set
One 3GX Flybarless System
One 325D 3G Carbon blades
One RCE-BL35P 35A Brushless ESC
One 450MX Brushless motor(3400KV)
One DS520 Digital servo
3 DS415M (Metal Gear)Digital servo

Needs:
Receiver(6-channel or more)
Pitch gaugeX1
11.1V 3S Li-Po 2000~2300mAh battery X1
Transmitter (6-channel or more,helicopter system)

Requirements:

3GX Programmable Flybarless System
Operating Temperature level: -10~60 degree
X and Y axis Operating Angle Range: -300~+300 degree
Z axis Operating Angle Range: -600~+600 degree
Size: 36.5x25.2x15.6 mm
Weight: 11g
Maximum working voltage: 8.5V

T-Rex 450Pro DFC
Length: 640mm
Height: 204mm
Main Rotor Diameter: 710mm
Tail Rotor Diameter: 158mm
Motor Drive Gear: 12T
Main Drive Gear: 121T
Autorotation Tail Drive Gear: 106T
Tail Drive Gear: 25T
Drive Gear Ratio: 1:10.08:4.24
Weight(w/o power system): 513g
Flying Weight: Approximate. 638g