Align T-Rex 250 Pro DFC Super Combo Helicopter Kit w/Motor/ESC/Gyro/S

3GX Programmable Flybarless System:
Brand brand-new revamped 3GX represents a new generation of multi function flybarless system. The dramatically enhanced performance will produce immediate impact on any lovers.
3GX is currently the smallest and lightest flybarless system on the marketplace. Two ports to directly connect Spektrum and JR satellite receivers, in addition to complete support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through a simple procedure. In addition, the 3GX can support all of the CCPM swashplate system currently on the marketplace consisting of 90, 120, 135, and 140 degrees swashplates.
Graphical showed instruction on the computer system setup software directs the user through a step by action setup procedure, enabling fast setups without omitting any steps.
Support Bluetooth connection. With the quickly to be released Bluetooth connection set, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps permitting live changes to 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is needed to reduce electronic wire clutters.
Custom specifications have actually been opened up in 3GX to permit pilots to tweak numerous settings for swashplate and rudder. Settings export function enables custom settings to be shared amongst pals.
3GX uses brand name brand-new gyroscope sensors of the highest requirements when compared with other flybarless systems currently on the marketplace, permitting it to be utilized under harsh conditions. Double axis plus rudder sensor dramatically enhances swashplate and rudder correction accuracy compared with last generation 3G. This is clearly visible in stable hover as well as highly aerobatic routines.
Suitable for helicopter of all class from 250 to 800, radiance engine or electric powered. The superior vibration resistant quality is evident even when installed with harder double sided mounting tape.
3GX uses 16 bit processor which is 4 times faster than previous generation, in addition to a totally re-written firmware. The outcome is a remarkable stability enhancement from previous generation, with stability that equals a flybarred helicopter, yet posses explosive agility.
With built in pirouette payment function, 3GX has the ability to stabilize the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flips type of maneuvers are quickly accomplished with accuracy.
3GX's rudder enables consistent rudder feel even under high speed conditions. This outstanding control feel will permit pilot of all ability levels to experience the best integration between 3GX and helicopter.
Support with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self stabilize, hold position as well as elevation, and even self-governing method point flights as well as return home.

3GX Programmable Flybarless System:
Operating voltage range:DC 3.5V~8.4V
Operating present consumption:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Specification:
Length:431mm
Height:150mm
Main Blade Length:205mm
Main Rotor Diameter:460mm
Tail Rotor Diameter:108mm
Motor Ponion Gear:15T
Main Drive Gear:120T
Tail Drive Gear:28T
Drive Gear Ratio:1:8:4.28
Weight(With Motor):260g

Standard equipment:
RCE-BL15P 15A Brushless ESC x 1
RCM-BL250MX(3600KV) Brushless motor x 1
DS415M Digital servo x 3
DS425M Digital servo x 1
3GX Flybarless System x 1

Accessories:
T-REX 250 PRO Kit Set x 1 set
250DFC Main Rotor Head Upgrade Set x 1set
3GX Programmable Flybarless System x 1 set
205 main blades x 1set
205D Carbon main blades x 1set
RCE-BL15P 15A Brushless ESC x 1
(Build-in 5~6V adjustable BEC)
RCM-BL250MX(3600KV) Brushless motor x 1
Motor ponion gear 15T x 1
DS425M Digital servo x 1
DS415M Digital servo x 3
Clip x 1
#00 Philips screw driver x 1
0.9mm Hex head wrench x 1
1.3mm HSS Hexagon screw driver x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge x 1
4.11.1V 3S Li-Po 850mAh battery x 1