Align T-Rex 250 Pro DFC Super Combo Helicopter Kit w/Motor/ESC/Gyro/S

3GX Programmable Flybarless System:
Brand brand-new upgraded 3GX represents a new generation of multi function flybarless system. The significantly enhanced efficiency will create immediate impact on any enthusiasts.
3GX is presently the tiniest and lightest flybarless system on the market. 2 ports to directly connect Spektrum and JR satellite receivers, in addition to full support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a few minutes through a simple procedure. In addition, the 3GX can support all the CCPM swashplate system presently on the market consisting of 90, 120, 135, and 140 degrees swashplates.
Graphical illustrated direction on the computer system setup software directs the user through an action by step setup procedure, allowing for fast setups without omitting any steps.
Support Bluetooth connection. With the quickly to be launched Bluetooth connection package, 3GX can be programmed wirelessly from a PC. Ultimately there will likewise be smartphone apps allowing live changes to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is had to reduce electronic wire clutters.
Custom specifications have actually been opened up in 3GX to permit pilots to tweak many settings for swashplate and rudder. Settings export function allows custom settings to be shared among friends.
3GX makes use of brand brand-new gyroscope sensors of the greatest specs when compared to other flybarless systems presently on the market, allowing it to be used under severe conditions. Dual axis plus rudder sensing unit significantly enhances swashplate and rudder correction precision compared to last generation 3G. This is clearly obvious in steady hover along with highly aerobatic routines.
Suitable for helicopter of all class from 250 to 800, glow engine or electrical powered. The remarkable vibration resistant attribute appears even when installed with harder double sided mounting tape.
3GX makes use of 16 bit processor which is 4 times faster than previous generation, in addition to an entirely re-written firmware. The outcome is a remarkable stability enhancement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
With integrated in pirouette payment function, 3GX has the ability to support the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are quickly achieved with precision.
3GX's rudder allows consistent rudder feel even under high speed conditions. This excellent control feel will permit pilot of all skill levels to experience the perfect integration between 3GX and helicopter.
Support with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self support, hold position along with altitude, as well as self-governing way point flights along with return home.

3GX Programmable Flybarless System:
Running voltage range:DC 3.5V~8.4V
Running current usage:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Specification:
Length:431mm
Height:150mm
Main Blade Length:205mm
Main Rotor Diameter:460mm
Tail Rotor Diameter:108mm
Motor Ponion Gear:15T
Main Drive Gear:120T
Tail Drive Gear:28T
Drive Gear Ratio:1:8:4.28
Weight(With Motor):260g

Standard equipment:
RCE-BL15P 15A Brushless ESC x 1
RCM-BL250MX(3600KV) Brushless motor x 1
DS415M Digital servo x 3
DS425M Digital servo x 1
3GX Flybarless System x 1

Accessories:
T-REX 250 PRO Kit Set x 1 set
250DFC Main Rotor Head Upgrade Set x 1set
3GX Programmable Flybarless System x 1 set
205 main blades x 1set
205D Carbon main blades x 1set
RCE-BL15P 15A Brushless ESC x 1
(Build-in 5~6V adjustable BEC)
RCM-BL250MX(3600KV) Brushless motor x 1
Motor ponion gear 15T x 1
DS425M Digital servo x 1
DS415M Digital servo x 3
Clip x 1
#00 Philips screw driver x 1
0.9mm Hex head wrench x 1
1.3mm HSS Hexagon screw driver x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge x 1
4.11.1V 3S Li-Po 850mAh battery x 1