Align T-Rex 250 Pro DFC Super Combo Helicopter Kit w/Motor/ESC/Gyro/S

3GX Programmable Flybarless System:
Brand name brand-new revamped 3GX represents a new generation of multi function flybarless system. The drastically enhanced efficiency will develop immediate effect on any lovers.
3GX is presently the smallest and lightest flybarless system on the market. 2 ports to straight connect Spektrum and JR satellite receivers, together with full assistance of Futaba's S-BUS system.
Based on the 3G FL760 manual setup process, the 3GX can be setup in a couple of minutes through a simple process. In addition, the 3GX can support all the CCPM swashplate system presently on the market including 90, 120, 135, and 140 degrees swashplates.
Graphical showed direction on the computer setup software application guides the user through an action by action setup process, permitting quick setups without leaving out any steps.
Support Bluetooth connectivity. With the quickly to be launched Bluetooth connectivity set, 3GX can be set wirelessly from a PC. Ultimately there will likewise be smartphone apps enabling live changes to 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is had to decrease electronic wire clutters.
Custom parameters have actually been opened up in 3GX to enable pilots to tweak various settings for swashplate and rudder. Settings export feature allows customized settings to be shared among friends.
3GX makes use of brand brand-new gyroscope sensors of the highest specifications when compared to other flybarless systems presently on the market, enabling it to be used under extreme conditions. Double axis plus rudder sensor drastically improves swashplate and rudder correction accuracy compared to last generation 3G. This is clearly obvious in stable hover as well as extremely aerobatic routines.
Suitable for helicopter of all class from 250 to 800, radiance engine or electrical powered. The superior vibration resistant attribute is evident even when installed with harder double sided installing tape.
3GX makes use of 16 bit processor which is 4 times faster than previous generation, together with an entirely re-written firmware. The result is a significant stability enhancement from previous generation, with stability that equals a flybarred helicopter, yet posses explosive agility.
With built in pirouette compensation function, 3GX has the ability to stabilize the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with accuracy.
3GX's rudder allows constant rudder feel even under high speed conditions. This outstanding control feel will enable pilot of all ability levels to experience the best integration between 3GX and helicopter.
Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as elevation, as well as self-governing method point flights as well as return house.

3GX Programmable Flybarless System:
Running voltage range:DC 3.5V~8.4V
Running present usage:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Specification:
Length:431mm
Height:150mm
Main Blade Length:205mm
Main Rotor Diameter:460mm
Tail Rotor Diameter:108mm
Motor Ponion Gear:15T
Main Drive Gear:120T
Tail Drive Gear:28T
Drive Gear Ratio:1:8:4.28
Weight(With Motor):260g

Standard equipment:
RCE-BL15P 15A Brushless ESC x 1
RCM-BL250MX(3600KV) Brushless motor x 1
DS415M Digital servo x 3
DS425M Digital servo x 1
3GX Flybarless System x 1

Accessories:
T-REX 250 PRO Kit Set x 1 set
250DFC Main Rotor Head Upgrade Set x 1set
3GX Programmable Flybarless System x 1 set
205 main blades x 1set
205D Carbon main blades x 1set
RCE-BL15P 15A Brushless ESC x 1
(Build-in 5~6V adjustable BEC)
RCM-BL250MX(3600KV) Brushless motor x 1
Motor ponion gear 15T x 1
DS425M Digital servo x 1
DS415M Digital servo x 3
Clip x 1
#00 Philips screw driver x 1
0.9mm Hex head wrench x 1
1.3mm HSS Hexagon screw driver x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge x 1
4.11.1V 3S Li-Po 850mAh battery x 1