Align T-Rex 250 Pro DFC Super Combo Helicopter Kit w/Motor/ESC/Gyro/S

3GX Programmable Flybarless System:
Brand brand-new upgraded 3GX represents a brand-new generation of multi function flybarless system. The drastically enhanced efficiency will develop instant effect on any lovers.
3GX is currently the smallest and lightest flybarless system on the marketplace. Two ports to straight connect Spektrum and JR satellite receivers, together with complete assistance of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a few minutes through a simple procedure. In addition, the 3GX can support all of the CCPM swashplate system currently on the marketplace consisting of 90, 120, 135, and 140 degrees swashplates.
Graphical illustrated guideline on the computer setup software guides the user through an action by action setup procedure, allowing for fast setups without leaving out any steps.
Support Bluetooth connection. With the quickly to be released Bluetooth connection set, 3GX can be set wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is had to reduce electronic wire clutters.
Custom parameters have been opened up in 3GX to allow pilots to fine tune various settings for swashplate and rudder. Settings export function allows customized settings to be shared among buddies.
3GX makes use of brand name brand-new gyroscope sensors of the greatest requirements when compared with other flybarless systems currently on the marketplace, allowing it to be utilized under harsh conditions. Dual axis plus rudder sensor drastically improves swashplate and rudder correction precision compared with last generation 3G. This is plainly noticeable in steady hover as well as extremely aerobatic routines.
Suitable for helicopter of all class from 250 to 800, glow engine or electric powered. The remarkable vibration resistant quality appears even when installed with harder double sided installing tape.
3GX makes use of 16 bit processor which is 4 times faster than previous generation, together with an entirely re-written firmware. The result is a dramatic stability enhancement from previous generation, with stability that matches a flybarred helicopter, yet posses explosive agility.
With built in pirouette payment function, 3GX has the ability to stabilize the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting turns kind of maneuvers are easily accomplished with precision.
3GX's rudder allows constant rudder feel even under high speed conditions. This exceptional control feel will allow pilot of all skill levels to experience the perfect combination in between 3GX and helicopter.
Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as altitude, as well as self-governing method point flights as well as return house.

3GX Programmable Flybarless System:
Running voltage range:DC 3.5V~8.4V
Running current consumption:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Specification:
Length:431mm
Height:150mm
Main Blade Length:205mm
Main Rotor Diameter:460mm
Tail Rotor Diameter:108mm
Motor Ponion Gear:15T
Main Drive Gear:120T
Tail Drive Gear:28T
Drive Gear Ratio:1:8:4.28
Weight(With Motor):260g

Standard equipment:
RCE-BL15P 15A Brushless ESC x 1
RCM-BL250MX(3600KV) Brushless motor x 1
DS415M Digital servo x 3
DS425M Digital servo x 1
3GX Flybarless System x 1

Accessories:
T-REX 250 PRO Kit Set x 1 set
250DFC Main Rotor Head Upgrade Set x 1set
3GX Programmable Flybarless System x 1 set
205 main blades x 1set
205D Carbon main blades x 1set
RCE-BL15P 15A Brushless ESC x 1
(Build-in 5~6V adjustable BEC)
RCM-BL250MX(3600KV) Brushless motor x 1
Motor ponion gear 15T x 1
DS425M Digital servo x 1
DS415M Digital servo x 3
Clip x 1
#00 Philips screw driver x 1
0.9mm Hex head wrench x 1
1.3mm HSS Hexagon screw driver x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge x 1
4.11.1V 3S Li-Po 850mAh battery x 1