Align T-Rex 250 Pro DFC Super Combo Helicopter Kit w/Motor/ESC/Gyro/S

3GX Programmable Flybarless System:
Brand name new revamped 3GX represents a new generation of multi function flybarless system. The significantly improved performance will produce instant impact on any lovers.
3GX is currently the smallest and lightest flybarless system on the market. 2 ports to directly connect Spektrum and JR satellite receivers, together with full assistance of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through an easy procedure. In addition, the 3GX can support all the CCPM swashplate system currently on the market including 90, 120, 135, and 140 degrees swashplates.
Graphical illustrated guideline on the computer system setup software guides the user through an action by step setup procedure, permitting quick setups without omitting any steps.
Support Bluetooth connectivity. With the quickly to be released Bluetooth connectivity set, 3GX can be configured wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 guv function, no external guv is needed to minimize electronic wire clutters.
Custom parameters have been opened up in 3GX to enable pilots to fine tune many settings for swashplate and rudder. Settings export feature enables customized settings to be shared amongst good friends.
3GX makes use of brand new gyroscope sensors of the greatest specs when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensing unit significantly improves swashplate and rudder correction precision compared to last generation 3G. This is plainly noticeable in stable hover as well as extremely aerobatic routines.
Suitable for helicopter of all class from 250 to 800, radiance engine or electrical powered. The superior vibration resistant characteristic appears even when mounted with harder double sided installing tape.
3GX makes use of 16 bit processor which is 4 times faster than previous generation, together with an entirely re-written firmware. The outcome is a remarkable stability improvement from previous generation, with stability that matches a flybarred helicopter, yet posses explosive agility.
With integrated in pirouette payment function, 3GX has the ability to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips kind of maneuvers are quickly achieved with precision.
3GX's rudder enables constant rudder feel even under high speed conditions. This outstanding control feel will enable pilot of all skill levels to experience the ideal integration in between 3GX and helicopter.
Support with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as altitude, as well as self-governing way point flights as well as return house.

3GX Programmable Flybarless System:
Running voltage variety:DC 3.5V~8.4V
Running present usage:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Specification:
Length:431mm
Height:150mm
Main Blade Length:205mm
Main Rotor Diameter:460mm
Tail Rotor Diameter:108mm
Motor Ponion Gear:15T
Main Drive Gear:120T
Tail Drive Gear:28T
Drive Gear Ratio:1:8:4.28
Weight(With Motor):260g

Standard equipment:
RCE-BL15P 15A Brushless ESC x 1
RCM-BL250MX(3600KV) Brushless motor x 1
DS415M Digital servo x 3
DS425M Digital servo x 1
3GX Flybarless System x 1

Accessories:
T-REX 250 PRO Kit Set x 1 set
250DFC Main Rotor Head Upgrade Set x 1set
3GX Programmable Flybarless System x 1 set
205 main blades x 1set
205D Carbon main blades x 1set
RCE-BL15P 15A Brushless ESC x 1
(Build-in 5~6V adjustable BEC)
RCM-BL250MX(3600KV) Brushless motor x 1
Motor ponion gear 15T x 1
DS425M Digital servo x 1
DS415M Digital servo x 3
Clip x 1
#00 Philips screw driver x 1
0.9mm Hex head wrench x 1
1.3mm HSS Hexagon screw driver x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge x 1
4.11.1V 3S Li-Po 850mAh battery x 1