Align T-Rex 250 Pro DFC Super Combo Helicopter Kit w/Motor/ESC/Gyro/S

3GX Programmable Flybarless System:
Brand name brand-new upgraded 3GX represents a brand-new generation of multi function flybarless system. The considerably enhanced efficiency will create immediate influence on any lovers.
3GX is presently the tiniest and lightest flybarless system on the market. 2 ports to straight link Spektrum and JR satellite receivers, along with complete support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a few minutes through an easy procedure. In addition, the 3GX can support all of the CCPM swashplate system presently on the market including 90, 120, 135, and 140 degrees swashplates.
Graphical showed instruction on the computer setup software guides the user through a step by step setup procedure, allowing for fast setups without leaving out any steps.
Support Bluetooth connection. With the quickly to be launched Bluetooth connection set, 3GX can be programmed wirelessly from a PC. Ultimately there will likewise be smartphone apps allowing live changes to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 guv function, no external guv is had to reduce electronic wire clutters.
Custom criteria have actually been opened up in 3GX to permit pilots to tweak many settings for swashplate and rudder. Settings export function allows customized settings to be shared among good friends.
3GX utilizes brand brand-new gyroscope sensing units of the highest specifications when compared with other flybarless systems presently on the market, allowing it to be used under severe conditions. Dual axis plus rudder sensor considerably improves swashplate and rudder correction precision compared with last generation 3G. This is plainly visible in steady hover along with extremely aerobatic routines.
Suitable for helicopter of all class from 250 to 800, radiance engine or electric powered. The superior vibration resistant quality appears even when installed with more difficult double sided mounting tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with an entirely re-written firmware. The outcome is a significant stability enhancement from previous generation, with stability that equals a flybarred helicopter, yet posses explosive agility.
With integrated in pirouette compensation function, 3GX has the ability to support the helicopter on a set point throughout pirouetting maneuvers. Pirouetting turns type of maneuvers are quickly achieved with precision.
3GX's rudder allows consistent rudder feel even under high speed conditions. This outstanding control feel will permit pilot of all skill levels to experience the perfect combination between 3GX and helicopter.
Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self support, hold position along with elevation, and even self-governing way point flights along with return house.

3GX Programmable Flybarless System:
Operating voltage variety:DC 3.5V~8.4V
Operating existing usage:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Specification:
Length:431mm
Height:150mm
Main Blade Length:205mm
Main Rotor Diameter:460mm
Tail Rotor Diameter:108mm
Motor Ponion Gear:15T
Main Drive Gear:120T
Tail Drive Gear:28T
Drive Gear Ratio:1:8:4.28
Weight(With Motor):260g

Standard equipment:
RCE-BL15P 15A Brushless ESC x 1
RCM-BL250MX(3600KV) Brushless motor x 1
DS415M Digital servo x 3
DS425M Digital servo x 1
3GX Flybarless System x 1

Accessories:
T-REX 250 PRO Kit Set x 1 set
250DFC Main Rotor Head Upgrade Set x 1set
3GX Programmable Flybarless System x 1 set
205 main blades x 1set
205D Carbon main blades x 1set
RCE-BL15P 15A Brushless ESC x 1
(Build-in 5~6V adjustable BEC)
RCM-BL250MX(3600KV) Brushless motor x 1
Motor ponion gear 15T x 1
DS425M Digital servo x 1
DS415M Digital servo x 3
Clip x 1
#00 Philips screw driver x 1
0.9mm Hex head wrench x 1
1.3mm HSS Hexagon screw driver x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge x 1
4.11.1V 3S Li-Po 850mAh battery x 1