Align T-Rex 250 Pro DFC Super Combo Helicopter Kit w/Motor/ESC/Gyro/S

3GX Programmable Flybarless System:
Brand new redesigned 3GX represents a new generation of multi function flybarless system. The significantly enhanced performance will produce instant impact on any lovers.
3GX is currently the tiniest and lightest flybarless system on the market. 2 ports to straight connect Spektrum and JR satellite receivers, together with complete assistance of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a few minutes through a simple procedure. In addition, the 3GX can support all of the CCPM swashplate system currently on the market including 90, 120, 135, and 140 degrees swashplates.
Graphical showed instruction on the computer setup software directs the user through an action by step setup procedure, enabling fast setups without leaving out any steps.
Support Bluetooth connectivity. With the quickly to be released Bluetooth connectivity set, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live changes to 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is had to decrease electronic wire clutters.
Custom parameters have been opened up in 3GX to permit pilots to fine tune numerous settings for swashplate and rudder. Settings export function enables custom-made settings to be shared amongst friends.
3GX makes use of brand new gyroscope sensors of the greatest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Double axis plus rudder sensing unit significantly enhances swashplate and rudder correction accuracy compared to last generation 3G. This is plainly visible in stable hover as well as extremely aerobatic routines.
Suitable for helicopter of all class from 250 to 800, radiance engine or electrical powered. The exceptional vibration resistant characteristic is evident even when mounted with more difficult double sided mounting tape.
3GX makes use of 16 bit processor which is 4 times faster than previous generation, together with a totally re-written firmware. The outcome is a dramatic stability improvement from previous generation, with stability that equals a flybarred helicopter, yet posses explosive agility.
With built in pirouette payment function, 3GX has the ability to support the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting turns kind of maneuvers are easily achieved with accuracy.
3GX's rudder enables constant rudder feel even under high speed conditions. This excellent control feel will permit pilot of all ability levels to experience the best integration in between 3GX and helicopter.
Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self support, hold position as well as elevation, as well as autonomous way point flights as well as return home.

3GX Programmable Flybarless System:
Running voltage range:DC 3.5V~8.4V
Running current intake:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Specification:
Length:431mm
Height:150mm
Main Blade Length:205mm
Main Rotor Diameter:460mm
Tail Rotor Diameter:108mm
Motor Ponion Gear:15T
Main Drive Gear:120T
Tail Drive Gear:28T
Drive Gear Ratio:1:8:4.28
Weight(With Motor):260g

Standard equipment:
RCE-BL15P 15A Brushless ESC x 1
RCM-BL250MX(3600KV) Brushless motor x 1
DS415M Digital servo x 3
DS425M Digital servo x 1
3GX Flybarless System x 1

Accessories:
T-REX 250 PRO Kit Set x 1 set
250DFC Main Rotor Head Upgrade Set x 1set
3GX Programmable Flybarless System x 1 set
205 main blades x 1set
205D Carbon main blades x 1set
RCE-BL15P 15A Brushless ESC x 1
(Build-in 5~6V adjustable BEC)
RCM-BL250MX(3600KV) Brushless motor x 1
Motor ponion gear 15T x 1
DS425M Digital servo x 1
DS415M Digital servo x 3
Clip x 1
#00 Philips screw driver x 1
0.9mm Hex head wrench x 1
1.3mm HSS Hexagon screw driver x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge x 1
4.11.1V 3S Li-Po 850mAh battery x 1