Align T-Rex 250 Pro DFC Super Combo Helicopter Kit w/Motor/ESC/Gyro/S

3GX Programmable Flybarless System:
Brand name brand-new redesigned 3GX represents a new generation of multi function flybarless system. The considerably improved efficiency will produce immediate effect on any lovers.
3GX is currently the tiniest and lightest flybarless system on the market. 2 ports to directly link Spektrum and JR satellite receivers, in addition to full assistance of Futaba's S-BUS system.
Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through an easy process. In addition, the 3GX can support all the CCPM swashplate system currently on the market consisting of 90, 120, 135, and 140 degrees swashplates.
Graphical illustrated instruction on the computer system setup software guides the user through a step by action setup process, permitting quick setups without omitting any steps.
Support Bluetooth connection. With the quickly to be launched Bluetooth connection package, 3GX can be set wirelessly from a PC. Ultimately there will also be smartphone apps enabling live adjustments to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is had to lower electronic wire clutters.
Custom criteria have been opened up in 3GX to permit pilots to fine tune various settings for swashplate and rudder. Settings export function enables custom-made settings to be shared amongst good friends.
3GX makes use of brand brand-new gyroscope sensing units of the greatest requirements when compared to other flybarless systems currently on the market, enabling it to be utilized under severe conditions. Double axis plus rudder sensor considerably improves swashplate and rudder correction accuracy compared to last generation 3G. This is clearly obvious in steady hover in addition to extremely aerobatic routines.
Suitable for helicopter of all class from 250 to 800, radiance engine or electrical powered. The remarkable vibration resistant attribute is evident even when mounted with more difficult double sided installing tape.
3GX makes use of 16 bit processor which is 4 times faster than previous generation, in addition to a completely re-written firmware. The outcome is a remarkable stability improvement from previous generation, with stability that matches a flybarred helicopter, yet posses explosive agility.
With integrated in pirouette payment function, 3GX is able to support the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with accuracy.
3GX's rudder enables constant rudder feel even under high speed conditions. This excellent control feel will permit pilot of all skill levels to experience the ideal combination in between 3GX and helicopter.
Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self support, hold position in addition to altitude, and even self-governing method point flights in addition to return house.

3GX Programmable Flybarless System:
Running voltage range:DC 3.5V~8.4V
Running present intake:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Specification:
Length:431mm
Height:150mm
Main Blade Length:205mm
Main Rotor Diameter:460mm
Tail Rotor Diameter:108mm
Motor Ponion Gear:15T
Main Drive Gear:120T
Tail Drive Gear:28T
Drive Gear Ratio:1:8:4.28
Weight(With Motor):260g

Standard equipment:
RCE-BL15P 15A Brushless ESC x 1
RCM-BL250MX(3600KV) Brushless motor x 1
DS415M Digital servo x 3
DS425M Digital servo x 1
3GX Flybarless System x 1

Accessories:
T-REX 250 PRO Kit Set x 1 set
250DFC Main Rotor Head Upgrade Set x 1set
3GX Programmable Flybarless System x 1 set
205 main blades x 1set
205D Carbon main blades x 1set
RCE-BL15P 15A Brushless ESC x 1
(Build-in 5~6V adjustable BEC)
RCM-BL250MX(3600KV) Brushless motor x 1
Motor ponion gear 15T x 1
DS425M Digital servo x 1
DS415M Digital servo x 3
Clip x 1
#00 Philips screw driver x 1
0.9mm Hex head wrench x 1
1.3mm HSS Hexagon screw driver x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge x 1
4.11.1V 3S Li-Po 850mAh battery x 1