Align T-Rex 250 Pro DFC Super Combo Helicopter Kit w/Motor/ESC/Gyro/S

3GX Programmable Flybarless System:
Brand name new upgraded 3GX represents a brand-new generation of multi function flybarless system. The considerably enhanced efficiency will develop instant impact on any enthusiasts.
3GX is currently the tiniest and lightest flybarless system on the marketplace. Two ports to directly link Spektrum and JR satellite receivers, along with complete support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through an easy procedure. In addition, the 3GX can support all the CCPM swashplate system currently on the marketplace including 90, 120, 135, and 140 degrees swashplates.
Graphical illustrated guideline on the computer setup software application guides the user through a step by action setup procedure, permitting quick setups without leaving out any steps.
Support Bluetooth connectivity. With the quickly to be launched Bluetooth connectivity kit, 3GX can be set wirelessly from a PC. Eventually there will likewise be smartphone apps permitting live adjustments to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is had to decrease electronic wire clutters.
Custom parameters have been opened up in 3GX to permit pilots to tweak many settings for swashplate and rudder. Settings export function permits custom-made settings to be shared amongst friends.
3GX makes use of brand new gyroscope sensing units of the highest requirements when compared with other flybarless systems currently on the marketplace, permitting it to be utilized under harsh conditions. Dual axis plus rudder sensing unit considerably enhances swashplate and rudder correction precision compared with last generation 3G. This is clearly noticeable in steady hover as well as highly aerobatic routines.
Suitable for helicopter of all class from 250 to 800, radiance engine or electric powered. The exceptional vibration resistant characteristic appears even when installed with more difficult double sided installing tape.
3GX makes use of 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a remarkable stability enhancement from previous generation, with stability that matches a flybarred helicopter, yet posses explosive agility.
With integrated in pirouette compensation function, 3GX has the ability to support the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flips kind of maneuvers are quickly accomplished with precision.
3GX's rudder permits consistent rudder feel even under high speed conditions. This exceptional control feel will permit pilot of all skill levels to experience the best integration between 3GX and helicopter.
Support with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self support, hold position as well as elevation, as well as autonomous method point flights as well as return home.

3GX Programmable Flybarless System:
Operating voltage variety:DC 3.5V~8.4V
Operating current consumption:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Specification:
Length:431mm
Height:150mm
Main Blade Length:205mm
Main Rotor Diameter:460mm
Tail Rotor Diameter:108mm
Motor Ponion Gear:15T
Main Drive Gear:120T
Tail Drive Gear:28T
Drive Gear Ratio:1:8:4.28
Weight(With Motor):260g

Standard equipment:
RCE-BL15P 15A Brushless ESC x 1
RCM-BL250MX(3600KV) Brushless motor x 1
DS415M Digital servo x 3
DS425M Digital servo x 1
3GX Flybarless System x 1

Accessories:
T-REX 250 PRO Kit Set x 1 set
250DFC Main Rotor Head Upgrade Set x 1set
3GX Programmable Flybarless System x 1 set
205 main blades x 1set
205D Carbon main blades x 1set
RCE-BL15P 15A Brushless ESC x 1
(Build-in 5~6V adjustable BEC)
RCM-BL250MX(3600KV) Brushless motor x 1
Motor ponion gear 15T x 1
DS425M Digital servo x 1
DS415M Digital servo x 3
Clip x 1
#00 Philips screw driver x 1
0.9mm Hex head wrench x 1
1.3mm HSS Hexagon screw driver x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge x 1
4.11.1V 3S Li-Po 850mAh battery x 1