Align T-Rex 250 Pro DFC Super Combo Helicopter Kit w/Motor/ESC/Gyro/S

3GX Programmable Flybarless System:
Brand name new upgraded 3GX represents a new generation of multi function flybarless system. The drastically improved efficiency will create instant influence on any lovers.
3GX is presently the smallest and lightest flybarless system on the marketplace. Two ports to straight link Spektrum and JR satellite receivers, along with complete support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup process, the 3GX can be setup in a couple of minutes through an easy process. In addition, the 3GX can support all of the CCPM swashplate system presently on the marketplace including 90, 120, 135, and 140 degrees swashplates.
Graphical showed instruction on the computer system setup software guides the user through a step by action setup process, permitting fast setups without omitting any steps.
Support Bluetooth connectivity. With the soon to be released Bluetooth connectivity set, 3GX can be set wirelessly from a PC. Ultimately there will also be smartphone apps allowing live adjustments to 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is needed to lower electronic wire clutters.
Custom specifications have been opened up in 3GX to permit pilots to fine tune various settings for swashplate and rudder. Settings export feature enables customized settings to be shared amongst good friends.
3GX uses brand new gyroscope sensors of the highest specs when compared to other flybarless systems presently on the marketplace, allowing it to be used under severe conditions. Double axis plus rudder sensing unit drastically improves swashplate and rudder correction precision compared to last generation 3G. This is plainly noticeable in steady hover as well as highly aerobatic routines.
Suitable for helicopter of all class from 250 to 800, radiance engine or electrical powered. The exceptional vibration resistant quality is evident even when installed with more difficult double sided installing tape.
3GX uses 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a significant stability enhancement from previous generation, with stability that equals a flybarred helicopter, yet posses explosive agility.
With built in pirouette compensation function, 3GX has the ability to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips kind of maneuvers are easily accomplished with precision.
3GX's rudder enables consistent rudder feel even under high speed conditions. This excellent control feel will permit pilot of all ability levels to experience the perfect combination between 3GX and helicopter.
Support with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as altitude, as well as autonomous way point flights as well as return house.

3GX Programmable Flybarless System:
Operating voltage variety:DC 3.5V~8.4V
Operating existing intake:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Specification:
Length:431mm
Height:150mm
Main Blade Length:205mm
Main Rotor Diameter:460mm
Tail Rotor Diameter:108mm
Motor Ponion Gear:15T
Main Drive Gear:120T
Tail Drive Gear:28T
Drive Gear Ratio:1:8:4.28
Weight(With Motor):260g

Standard equipment:
RCE-BL15P 15A Brushless ESC x 1
RCM-BL250MX(3600KV) Brushless motor x 1
DS415M Digital servo x 3
DS425M Digital servo x 1
3GX Flybarless System x 1

Accessories:
T-REX 250 PRO Kit Set x 1 set
250DFC Main Rotor Head Upgrade Set x 1set
3GX Programmable Flybarless System x 1 set
205 main blades x 1set
205D Carbon main blades x 1set
RCE-BL15P 15A Brushless ESC x 1
(Build-in 5~6V adjustable BEC)
RCM-BL250MX(3600KV) Brushless motor x 1
Motor ponion gear 15T x 1
DS425M Digital servo x 1
DS415M Digital servo x 3
Clip x 1
#00 Philips screw driver x 1
0.9mm Hex head wrench x 1
1.3mm HSS Hexagon screw driver x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge x 1
4.11.1V 3S Li-Po 850mAh battery x 1