Align T-Rex 250 Pro DFC Super Combo Helicopter Kit w/Motor/ESC/Gyro/S

3GX Programmable Flybarless System:
Brand brand-new upgraded 3GX represents a new generation of multi function flybarless system. The considerably improved performance will produce immediate influence on any lovers.
3GX is currently the tiniest and lightest flybarless system on the marketplace. Two ports to straight connect Spektrum and JR satellite receivers, in addition to complete support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a few minutes through a basic procedure. In addition, the 3GX can support all the CCPM swashplate system currently on the marketplace consisting of 90, 120, 135, and 140 degrees swashplates.
Graphical illustrated guideline on the computer setup software application guides the user through an action by action setup procedure, enabling quick setups without omitting any steps.
Support Bluetooth connection. With the soon to be launched Bluetooth connection kit, 3GX can be configured wirelessly from a PC. Ultimately there will likewise be smartphone apps permitting live adjustments to 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is had to minimize electronic wire clutters.
Custom parameters have actually been opened up in 3GX to enable pilots to fine tune numerous settings for swashplate and rudder. Settings export feature enables custom-made settings to be shared amongst friends.
3GX utilizes brand brand-new gyroscope sensors of the greatest specs when compared to other flybarless systems currently on the marketplace, permitting it to be used under harsh conditions. Dual axis plus rudder sensing unit considerably improves swashplate and rudder correction precision compared to last generation 3G. This is clearly noticeable in steady hover as well as highly aerobatic routines.
Suitable for helicopter of all class from 250 to 800, glow engine or electric powered. The superior vibration resistant characteristic is evident even when installed with harder double sided installing tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, in addition to an entirely re-written firmware. The outcome is a significant stability improvement from previous generation, with stability that equals a flybarred helicopter, yet posses explosive agility.
With built in pirouette payment function, 3GX has the ability to stabilize the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting turns kind of maneuvers are quickly achieved with precision.
3GX's rudder enables constant rudder feel even under high speed conditions. This outstanding control feel will enable pilot of all skill levels to experience the perfect combination in between 3GX and helicopter.
Support with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as elevation, and even self-governing way point flights as well as return house.

3GX Programmable Flybarless System:
Operating voltage variety:DC 3.5V~8.4V
Operating present consumption:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Specification:
Length:431mm
Height:150mm
Main Blade Length:205mm
Main Rotor Diameter:460mm
Tail Rotor Diameter:108mm
Motor Ponion Gear:15T
Main Drive Gear:120T
Tail Drive Gear:28T
Drive Gear Ratio:1:8:4.28
Weight(With Motor):260g

Standard equipment:
RCE-BL15P 15A Brushless ESC x 1
RCM-BL250MX(3600KV) Brushless motor x 1
DS415M Digital servo x 3
DS425M Digital servo x 1
3GX Flybarless System x 1

Accessories:
T-REX 250 PRO Kit Set x 1 set
250DFC Main Rotor Head Upgrade Set x 1set
3GX Programmable Flybarless System x 1 set
205 main blades x 1set
205D Carbon main blades x 1set
RCE-BL15P 15A Brushless ESC x 1
(Build-in 5~6V adjustable BEC)
RCM-BL250MX(3600KV) Brushless motor x 1
Motor ponion gear 15T x 1
DS425M Digital servo x 1
DS415M Digital servo x 3
Clip x 1
#00 Philips screw driver x 1
0.9mm Hex head wrench x 1
1.3mm HSS Hexagon screw driver x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge x 1
4.11.1V 3S Li-Po 850mAh battery x 1