Align T-Rex 250 Pro DFC Super Combo Helicopter Kit w/Motor/ESC/Gyro/S

3GX Programmable Flybarless System:
Brand name new redesigned 3GX represents a brand-new generation of multi function flybarless system. The significantly enhanced efficiency will create immediate impact on any lovers.
3GX is currently the smallest and lightest flybarless system on the market. 2 ports to directly link Spektrum and JR satellite receivers, in addition to full support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through a simple procedure. In addition, the 3GX can support all of the CCPM swashplate system currently on the market consisting of 90, 120, 135, and 140 degrees swashplates.
Graphical illustrated direction on the computer system setup software application guides the user through an action by step setup procedure, enabling fast setups without leaving out any steps.
Support Bluetooth connection. With the quickly to be released Bluetooth connection kit, 3GX can be configured wirelessly from a PC. Ultimately there will likewise be smartphone apps enabling live adjustments to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is needed to lower electronic wire clutters.
Custom specifications have been opened up in 3GX to allow pilots to tweak many settings for swashplate and rudder. Settings export function permits custom settings to be shared amongst good friends.
3GX utilizes brand name new gyroscope sensors of the highest specifications when compared with other flybarless systems currently on the market, enabling it to be used under extreme conditions. Dual axis plus rudder sensing unit significantly enhances swashplate and rudder correction accuracy compared with last generation 3G. This is plainly visible in steady hover as well as highly aerobatic routines.
Suitable for helicopter of all class from 250 to 800, radiance engine or electric powered. The superior vibration resistant characteristic is evident even when installed with harder double sided installing tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, in addition to a totally re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that matches a flybarred helicopter, yet posses explosive agility.
With integrated in pirouette payment function, 3GX is able to stabilize the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flips type of maneuvers are easily achieved with accuracy.
3GX's rudder permits constant rudder feel even under high speed conditions. This exceptional control feel will allow pilot of all ability levels to experience the best combination in between 3GX and helicopter.
Support with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self stabilize, hold position as well as altitude, as well as self-governing method point flights as well as return house.

3GX Programmable Flybarless System:
Operating voltage range:DC 3.5V~8.4V
Operating present usage:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Specification:
Length:431mm
Height:150mm
Main Blade Length:205mm
Main Rotor Diameter:460mm
Tail Rotor Diameter:108mm
Motor Ponion Gear:15T
Main Drive Gear:120T
Tail Drive Gear:28T
Drive Gear Ratio:1:8:4.28
Weight(With Motor):260g

Standard equipment:
RCE-BL15P 15A Brushless ESC x 1
RCM-BL250MX(3600KV) Brushless motor x 1
DS415M Digital servo x 3
DS425M Digital servo x 1
3GX Flybarless System x 1

Accessories:
T-REX 250 PRO Kit Set x 1 set
250DFC Main Rotor Head Upgrade Set x 1set
3GX Programmable Flybarless System x 1 set
205 main blades x 1set
205D Carbon main blades x 1set
RCE-BL15P 15A Brushless ESC x 1
(Build-in 5~6V adjustable BEC)
RCM-BL250MX(3600KV) Brushless motor x 1
Motor ponion gear 15T x 1
DS425M Digital servo x 1
DS415M Digital servo x 3
Clip x 1
#00 Philips screw driver x 1
0.9mm Hex head wrench x 1
1.3mm HSS Hexagon screw driver x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge x 1
4.11.1V 3S Li-Po 850mAh battery x 1