Align T-Rex 250 Pro DFC Super Combo Helicopter Kit w/Motor/ESC/Gyro/S

3GX Programmable Flybarless System:
Brand name new upgraded 3GX represents a brand-new generation of multi function flybarless system. The significantly enhanced performance will develop instant influence on any enthusiasts.
3GX is currently the smallest and lightest flybarless system on the market. Two ports to directly link Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup process, the 3GX can be setup in a couple of minutes through a simple process. In addition, the 3GX can support all the CCPM swashplate system currently on the market consisting of 90, 120, 135, and 140 degrees swashplates.
Graphical showed guideline on the computer system setup software application directs the user through a step by step setup process, permitting quick setups without omitting any steps.
Support Bluetooth connection. With the soon to be launched Bluetooth connection kit, 3GX can be configured wirelessly from a PC. Eventually there will also be smartphone apps enabling live adjustments to 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is had to decrease electronic wire clutters.
Custom parameters have been opened up in 3GX to enable pilots to tweak many settings for swashplate and rudder. Settings export function allows custom settings to be shared among good friends.
3GX makes use of brand new gyroscope sensors of the greatest requirements when compared to other flybarless systems currently on the market, enabling it to be utilized under severe conditions. Dual axis plus rudder sensing unit significantly improves swashplate and rudder correction precision compared to last generation 3G. This is clearly visible in steady hover as well as extremely aerobatic routines.
Suitable for helicopter of all class from 250 to 800, radiance engine or electrical powered. The remarkable vibration resistant characteristic appears even when mounted with harder double sided installing tape.
3GX makes use of 16 bit processor which is 4 times faster than previous generation, along with a totally re-written firmware. The result is a remarkable stability enhancement from previous generation, with stability that matches a flybarred helicopter, yet posses explosive agility.
With built in pirouette compensation function, 3GX has the ability to stabilize the helicopter on a set point throughout pirouetting maneuvers. Pirouetting turns type of maneuvers are easily achieved with precision.
3GX's rudder allows constant rudder feel even under high speed conditions. This outstanding control feel will enable pilot of all ability levels to experience the perfect combination between 3GX and helicopter.
Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as elevation, as well as self-governing method point flights as well as return home.

3GX Programmable Flybarless System:
Running voltage variety:DC 3.5V~8.4V
Running present intake:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Specification:
Length:431mm
Height:150mm
Main Blade Length:205mm
Main Rotor Diameter:460mm
Tail Rotor Diameter:108mm
Motor Ponion Gear:15T
Main Drive Gear:120T
Tail Drive Gear:28T
Drive Gear Ratio:1:8:4.28
Weight(With Motor):260g

Standard equipment:
RCE-BL15P 15A Brushless ESC x 1
RCM-BL250MX(3600KV) Brushless motor x 1
DS415M Digital servo x 3
DS425M Digital servo x 1
3GX Flybarless System x 1

Accessories:
T-REX 250 PRO Kit Set x 1 set
250DFC Main Rotor Head Upgrade Set x 1set
3GX Programmable Flybarless System x 1 set
205 main blades x 1set
205D Carbon main blades x 1set
RCE-BL15P 15A Brushless ESC x 1
(Build-in 5~6V adjustable BEC)
RCM-BL250MX(3600KV) Brushless motor x 1
Motor ponion gear 15T x 1
DS425M Digital servo x 1
DS415M Digital servo x 3
Clip x 1
#00 Philips screw driver x 1
0.9mm Hex head wrench x 1
1.3mm HSS Hexagon screw driver x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge x 1
4.11.1V 3S Li-Po 850mAh battery x 1