Align T-Rex 250 Plus Dfc Rtf

Guidelines:
The totally assembled helicopter can be flown immediately just by plugging in a charged battery, enabling the pilot to bypass assembly and change procedure. T-REX 250 PLUS DFC complete plan was assembled and tuned at the factory. Before you can fly, This totally assembled helicopter can be flown immediately just by plugging in a charged battery, enabling the pilot to bypass assembly and change process.
The helicopter utilizes DFC rotor head assembly, coupled with 3GX MRS flybarless system enhanced for T-REX 250 PLUS DFC flight characteristics. With no change or tuning, this combination will offer ideal stability suitable for pilots of all levels.
For those lovers who want to tweak 3GX MRS even further, it can be done through a few basic steps.
With the addition of the brand brand-new 3GX MRS, the T-REX 250 PLUS DFC presses past the performance constraint of flybar helicopter, improving both stability and 3D performance, while keeping a down to earth rate level.

Features:
1. T-REX 250 PLUS DFC BTF（Ready To Fly）complete plan was assembled and tuned at the factory. This totally assembled helicopter can be flown immediately just by plugging in a charged battery, enabling the pilot to bypass assembly and change procedure.
2.Line up T6 R/C system utilizes Futaba 2.4G S-FHSS frequency hopping 6 channel transmitter, with complete helicopter functions along with 15 design memory.
3.Integrated in normal flight mode and stunt flight mode, with 2 action double rate settings.
4. New style linkage rod design, complete assembly increases linkage rod rigidness, enabling the pitch slider (follower) to be left out, resulting in a head assembly that is much streamlined and rigid.
5. Geared up with newly launched 3GX MRS flybarless system, with FHSS 2.4GHz buit in get function, support Spektrum DSM2/DSMX or JR DSM2 satellite. For simpler and more direct setup, with setting enhanced for T-Rex 250 Plus DFC, resulting in more stable and more preferable control feel than before.
6. Developed particularly for DFC rotorhead system, improving DFC connecting rod's strength and reducing linkage detachment throughout extreme flight maneuvers.
7. Product integration technology utilized in frames, improving rigidness and simplifies maintenance.
8. New style fast removable gyroscope mounting platform incorporated with rudder servo mount, successfully utilizes frame?s inner space for streamlined maintenance.
9. New anti-rotation guide.
10. Reinforce landing skids improved its toughness.
11. High performance shaft tail drive system, successfully increase rudder performance and decrease power loss.
12. Uses newly established, highest spec and superior anti-wear product to increase the total strength and toughness for torque tube drive gear. Successfully reduce gear striping and crash damage.
13. Single unit tail belt unit with the brand-new counter weighted tail blade grips make it simpler assembly and improving rudder performance.
14. Uses double point accessory design for no play and greater accuracy control feel.
15. Recently styled aerodynamically canopy for the ultimate fit.

Users should have a certain idea of security to run the R/C helicopters.
Be sure to check out and adhere to related security notes of instruction manual prior to flying.

Specification(3GX MRS):
Operating Temperature:-10~60 degree
Ideal Voltage Range:DC 3.5~8.4V
Operating existing usage:<100mA @4.8V
Operating humidity:0%~95%
RoHS certified
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Size:37.6x22.4x13 mm Size
Weight: 10g Weight

Specification:(T-REX 250 PLUS DFC):
Length:431mm
Height:150mm
Main Blade Length:205mm
Main Rotor Diameter:460mm
Tail Rotor Diameter:100mm
Motor Ponion Gear:15T
Main Drive Gear:120T
Tail Drive Gear:28T
Drive Gear Ratio:1:8:4.28
Weight(With Motor):250g

Accessories:
T-REX 250 PRO Kit Set x 1 set
205D Carbon Fiber Blades x 1 set
RCM-BL250MX(3600KV) Brushless motor x 1
ALIGN T6 of Futaba S-FHSS 2.4G Transmitter x 1
3GX MRS Programmable Flybarless System X 1set
DS425M Digital servo x 1
DS415M Digital servo x 3
RCE-BL15X Brushless ESC x 1 set
37mm Tail Blade x 1 set
Balance Charger RCC-3SX x 1
11.1V 3S Li-Po 850mAh battery x 1
1.5V AA Zinc-Carbon Battery x 4

Radio transmitter and electronic equipment required for assembly:
1.Pitch gauge x 1