Align T-Rex 250 Plus DFC BTF

Instructions:
The completely put together helicopter can be flown immediately just by plugging in a charged battery, permitting the pilot to bypass assembly and change process. T-REX 250 PLUS DFC complete plan was put together and tuned at the factory. Prior to you can fly, you have to simply bind the design with transmitter and either Futaba S-FHSS system / Spektrum DSM2/DSMX / JR DSM2 appropriately following the manual instruction.
The helicopter utilizes DFC rotor head assembly, coupled with 3GX MRS flybarless system enhanced for T-REX 250 PLUS DFC flight qualities. Without any change or tuning, this combination will provide ideal stability suitable for pilots of all levels.
For those lovers who want to fine tune 3GX MRS even better, it can be done through a few basic steps.
With the addition of the brand name new 3GX MRS, the T-REX 250 PLUS DFC pushes past the performance constraint of flybar helicopter, improving both stability and 3D performance, while maintaining a down to earth rate level.


Features:
1. T-REX 250 PLUS DFC BTF(Bind To Fly)complete plan was put together and tuned at the factory. Appropriate for Futaba S-FHSS 2.4Ghz system/JR DSM2 and Spektrum DSM2/DSMX system transmitter to bind and fly.
2. New design linkage rod design, complete assembly increases linkage rod rigidness, permitting the pitch slider (follower) to be left out, leading to a head assembly that is much simplified and rigid.
3. Equipped with freshly launched 3GX MR flybarless system, with FHSS 2.4GHz buit in receive function, assistance Spektrum DSM2/DSMX or JR DSM2 satellite. For easier and more direct setup, with setting enhanced for T-Rex 250 Plus DFC, leading to more steady and more preferable control feel than before.
4. Developed particularly for DFC rotorhead system, improving DFC connecting rod's strength and decreasing linkage detachment throughout severe flight maneuvers.
5. Product combination technology utilized in frames, improving rigidness and streamlines upkeep.
6. New design quick removable gyroscope mounting platform incorporated with rudder servo mount, efficiently utilizes frame's inner space for simplified upkeep.
7. New anti-rotation guide.
8. Strengthen landing skids enhanced its sturdiness.
9. High performance shaft tail drive system, efficiently increase rudder performance and reduce power loss.
10. Utilizes freshly developed, highest specification and exceptional anti-wear product to increase the general strength and sturdiness for torque tube drive gear. Effectively reduce gear striping and crash damage.
11. Single system tail belt system with the new counter weighted tail blade grips make it much easier assembly and improving rudder performance.
12. Utilizes double point accessory design for no play and greater accuracy control feel.
13. Newly styled aerodynamically canopy for the supreme fit.

Users need to have a specific principle of security to run the R/C helicopters.
Be sure to read and comply with associated security notes of user's manual before flying.

Specification(3GX MRS) :
Operating Temperature:-10~60 degree
Appropriate Voltage Range:DC 3.5~8.4V
Operating existing consumption:<100mA @4.8V
Operating humidity:0%~95%
RoHS certified
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Size:37.6x22.4x13 mm Size
Weight: 10g Weight

Specification:(T-REX 250 PLUS DFC)
Length:431mm
Height:150mm
Main Blade Length:205mm
Main Rotor Diameter:460mm
Tail Rotor Diameter:100mm
Motor Ponion Gear:15T
Main Drive Gear:120T
Tail Drive Gear:28T
Drive Gear Ratio:1:8:4.28
Weight(With Motor):250g

Accessories:
T-REX 250 PRO Kit Set x 1 set
205D Carbon Fiber Blades x 1 set
RCM-BL250MX(3600KV) Brushless motor x 1
3GX MRS Programmable Flybarless System X 1set
DS425M Digital servo x 1
DS415M Digital servo x 3
RCE-BL15P Brushless ESC x 1 set
37mm Tail Blade x 1 set

Radio transmitter and electronic equipment required for assembly:
1.ALIGN T6 of Futaba S-FHSS 2.4G Transmitter or JR/Spektrum 2.4GHz Transmitter(DSM2?DSMX)
2.Pitch gauge x 1
3.11.1V 3S Li-Po 850mAh battery x 1