Align T-REX 150 DFC Super Combo W/Metal Swash & Carry Case

Align's tiniest and most small 3D helicopter T-Rex 150 DFC, carries the very same superior pedigree and design concept that stemmed from the successful T-Rex line of helicopters. Featuring strong power, superior flight control stability, and geared up with high-end elements, far going beyond other helicopters presently on the market.

Twin brushless motor design, paired with 2s 7.4v 250mah battery, producing power that will exceed all your expectations. Metal DFC primary rotor head assembly featuring high-end aesthetic and superior flight performance; in addition, an integrated control system with specially optimized 3-axis gyro, receiver, electronic speed controller, and 4g servos. All these allow the T-Rex 150 DFC to posses the very same stability, superior dexterity, and tail holding efficiency as the larger helicopters.

T-Rex 150 features built in Futaba S-FHSS 2.4Ghz system, and support the use of Spektrum DSM2/DSMX / JR DSM2/DSMJ/DMSS satellite receivers. To get the T-Rex 150 airborne, everythings required is inputting of parameters noted in manual into your transmitter, and binding of your transmitter.

Miniature size, control precision that appears like the larger helicopters, enables you to delight in flying inside a confined space. Beginners can even enjoy this with ease by just denying the speed dial. The ingenious advancement T-Rex 150 will bring you a new measurement of flying enjoyment.

Specification:
Length: 255mm
Height: 80mm
Main Blade Length: 120mm
Main Rotor Size: 271mm
Tail Rotor Size: 45mm
Motor Pinion Gear: 10T
Main Drive Gear: 78T
Drive Gear Ratio: 1:7.8
Weight (w/o Battery): 53g

Devices:
T-REX 150 DFC set x 1
Main Blades x 2 set
Tail Blades x 1 set
150M Main Motor x 1
150M Tail Motor x 1
DS155 Digital Servo x 1
DS150 Digital Servo x 2
Going Plug x 1
Remote Extension x 1
7.4V Li-Po 250mAh Li-Polymer Battery x 2
150 Carry Box-Black x 1(292x160x69mm)
1.3mm Hexagon screw motorist(Blue/8.2g) x 2
0.9mm Hexagon screw motorist(Red/8g) x 1
Parts box E x 1(78.5x60.9x21mm)
Parts box A x 1(52x40x12mm)
CH150X Li-Po Battery charger x 1

Radio transmitter and electronic devices needed for assembly:
1.ALIGN T6 or Futaba S-FHSS 2.4G Transmitter or JR DSM2/DSMJ/DMSS、Spektrum DSM2/DSMX 2.4GHz Transmitter

You will love this item if you have the item just above stated.




Features



Includes 24-inch remote receiver extensionReplacement remote receiver for DSMX® receivers that use a remote receiverOptional 2nd remote receiver for the AR9010 receiver or Fourth remote receiver for the AR9110




Overview


The remote receiver can be utilized as a replacement for any DSMX receiver that makes use of a remote receiver. It can also be utilized as an optional 2nd remote receiver for the AR9010 or 4th remote receiver for the AR9110.
The remote receiver includes one 24-inch extension; nevertheless, different lengths of receiver extensions can be bought enabling different placement choices for installing purposes. Added remote receiver extensions are offered in 6", 9", 12", 24" and 36" lengths.
Always purchase products from a Horizon Hobby, Inc. authorized dealer to make sure genuine high-quality Spektrum product. Horizon Hobby, Inc. disclaims all support and service warranty with regards, but not limited to, compatibility and performance of counterfeit products or products declaring compatibility with DSM2, DSMX or Spektrum.
Attention: Horizon Hobby has actually confirmed that Spektrum Products being offered by KoKo Innovation are counterfeit.  We consider it a danger to utilize these products, waive all liability and will not support any service warranty or service in concerns to them.








Requirements


Type: DSMX Remote Receiver
Modulation: DSMX
Band: 2.4GHz
Length: 0.98 in (25mm)
Width: 0.89 in (23mm)
Height: 0.27 in (6.9mm)





Media Gallery





 View Image Gallery






Articles, Reviews, and Hyperlinks




 Antenna Placement When Utilizing Remote Receivers