Align T-Rex 150 DFC Combo BTF Twin BL Motor, 2S 7.4V 250Mah

Align's smallest and most small 3D helicopter T-Rex 150 DFC, brings the exact same remarkable pedigree and design concept that originated from the effective T-Rex line of helicopters. Featuring strong power, remarkable flight control stability, and equipped with luxury elements, far going beyond other helicopters currently on the market.

Twin brushless motor design, coupled with 2s 7.4v 250mah battery, developing power that will go beyond all your expectations. Metal DFC main rotor head assembly featuring luxury aesthetic and remarkable flight efficiency; in addition, an integrated control system with specifically enhanced 3-axis gyro, receiver, electronic speed controller, and 4g servos. All of these enable the T-Rex 150 DFC to posses the exact same stability, remarkable dexterity, and tail holding efficiency as the larger helicopters.

T-Rex 150 functions built in Futaba S-FHSS 2.4Ghz system, and support using Spektrum DSM2/DSMX / JR DSM2/DSMJ/DMSS satellite receivers. To get the T-Rex 150 air-borne, everythings needed is inputting of criteria noted in manual into your transmitter, and binding of your transmitter.

Miniature size, control accuracy that looks like the larger helicopters, enables you to take pleasure in flying inside a restricted space. Newbies can even enjoy this with ease by simply rejecting the speed dial. The ingenious breakthrough T-Rex 150 will inspire you a brand-new measurement of flying enjoyment.

Specification:
Length: 255mm
Height: 80mm
Main Blade Length: 120mm
Main Rotor Size: 271mm
Tail Rotor Size: 41mm
Motor Pinion Gear: 10T
Main Drive Gear: 78T
Drive Gear Ratio: 1:7.8
Weight (w/o Battery): 53g

Devices:
T-REX 150 DFC Set x 1
Main Blades x 2set
Tail Blades x 1
150M Main Motor x 1
150M Tail Motor x 1
S150 micro Servo x 2
DS155 micro Servo x 1
Blnd Plug x 1
Remote Extension x 1
7.5V Li-Po 250mAh Li-Polymer Battery x 1

Radio transmitter and electronic devices needed for assembly:
1.ALIGN T6 or Futaba S-FHSS 2.4G Transmitter or JR DSM2/DSMJ/DMSS、Spektrum DSM2/DSMX 2.4GHz Transmitter

Want another wonderful thing to enhance the above mentioned thing?

2S1P 7.4V 250mAh/30C

Use for T-REX 150.

Instruction::
Max Continuous Discharge: 30C. Normal operating temperature is approx. 40-65?C(within 80% of rated discharge). Max. temperature: 80?C.
Recommend to discharge the battery within 80% of rated discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and efficiency will lower due to high current, high temperature and over-discharge)

KEEP IN MIND::
When utilizing high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can't surpass 80% of the max capacity after full crediting guarantee a good cycle performance.Recommend to full charge a brand brand-new battery before utilizing and just discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a routine to constantly count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping utilizing can not reduce than 3.4V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35℃ in a airtight vehicle. The environment high temperature might trigger the damage or the threat of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery right away. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory utilizing guidelines, perhaps trigger the battery to inflate or any dangerous mishap takes place.
Do not leave the battery charger is operating unattended as it may trigger a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Dimension:47x21.5x12mm
Weight:15g