Align T-Rex 150 DFC Combo BTF Twin BL Motor, 2S 7.4V 250Mah

Align's smallest and most petite 3D helicopter T-Rex 150 DFC, brings the very same exceptional pedigree and design concept that stemmed from the successful T-Rex line of helicopters. Including strong power, exceptional flight control stability, and geared up with luxury elements, far surpassing other helicopters presently on the market.

Twin brushless motor design, paired with 2s 7.4v 250mah battery, creating power that will surpass all your expectations. Metal DFC main rotor head assembly including luxury aesthetic and exceptional flight efficiency; in addition, an incorporated control system with specifically enhanced 3-axis gyro, receiver, electronic speed controller, and 4g servos. All these make it possible for the T-Rex 150 DFC to posses the very same stability, exceptional dexterity, and tail holding efficiency as the larger helicopters.

T-Rex 150 functions integrated in Futaba S-FHSS 2.4Ghz system, and support making use of Spektrum DSM2/DSMX / JR DSM2/DSMJ/DMSS satellite receivers. To get the T-Rex 150 air-borne, all thats needed is inputting of criteria listed in handbook into your transmitter, and binding of your transmitter.

Miniature size, control accuracy that appears like the larger helicopters, allows you to delight in flying inside a confined space. Newbies can even enjoy this with ease by simply denying the speed dial. The innovative advancement T-Rex 150 will inspire you a new measurement of flying enjoyment.

Specification:
Length: 255mm
Height: 80mm
Main Blade Length: 120mm
Main Rotor Diameter: 271mm
Tail Rotor Diameter: 41mm
Motor Pinion Gear: 10T
Main Drive Gear: 78T
Drive Gear Ratio: 1:7.8
Weight (w/o Battery): 53g

Devices:
T-REX 150 DFC Set x 1
Main Blades x 2set
Tail Blades x 1
150M Main Motor x 1
150M Tail Motor x 1
S150 micro Servo x 2
DS155 micro Servo x 1
Blnd Plug x 1
Remote Extension x 1
7.5V Li-Po 250mAh Li-Polymer Battery x 1

Radio transmitter and electronic equipment needed for assembly:
1.ALIGN T6 or Futaba S-FHSS 2.4G Transmitter or JR DSM2/DSMJ/DMSS、Spektrum DSM2/DSMX 2.4GHz Transmitter

Want an additional excellent thing to enhance the above discussed thing?

2S1P 7.4V 250mAh/30C

Usage for T-REX 150.

Instruction::
Max Constant Discharge: 30C. Normal operating temperature level is approx. 40-65?C(within 80% of rated discharge). Max. temperature level: 80?C.
Recommend to release the battery within 80% of rated discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and efficiency will decrease due to high current, high temperature level and over-discharge)

KEEP IN MIND::
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature level. Releasing capacity cannot go beyond 80% of limit capacity after full crediting make sure a great cycle performance.Recommend to full charge a brand brand-new battery before using and just release the battery 50% for first 5 times to make a great efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage security on ESC (Cell voltage after stopping using can not lower than 3.4V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunlight or store/ charge batteries at the temperature level up to 35℃ in a airtight vehicle. The environment high temperature level could cause the damage or the risk of burst. If the battery ends up being hot while high current discharging or flying, please do not charge the battery right away. Wait to cool down(about 20 minutes), then inspect to charge. If against follow the original factory using guidelines, possibly cause the battery to inflate or any harmful mishap takes place.
Do not leave the battery charger is running unattended as it might cause a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Dimension:47x21.5x12mm
Weight:15g