Align RCE-BL70G 70A Brushless ESC w/Governor Mode

This is the Align RCE-BL70G 70 Amp Brushless Electronic Speed Controller with Governor Mode.

Features: Large-sized high performance heatsink makes the ESC steady under big current output.
5-6V step-less adjustable BEC output permitting a customized voltage setting to match the servo specs.
BEC output making use of switching power system, ideal for 7.4-22.2V (2s-6s) Li battery, with constant current score of 3A, and burst score of 5A.
3 programmable throttle speed settings to support fast throttle response.
Consist of soft start and governor mode.
Little and compact PCB design for light-weight and easy setup.
Large heat sink for optimum thermal efficiency.
Highly suitable: will deal with 98% of all brushless motors presently on the market.
Ultra-smooth motor start developed to keep up all sort of brushless motors.
The power inlet makes use of a Japanese made "Low ESR" capacitor in order to provide steady power source.
The throttle has more than 200 action resolution that supplies excellent throttle response and control.
If the airplane needs to land or crash in an unforeseen location and end up being lost, the pilot can allow the Airplane Locator Option. The Airplane Locator Option is engaged by tuning off the transmitter. When the ESC does not get a signal from the transmitter for 30 seconds, it will begin to send an alarm to the motor. The noise of the alarm will assist the pilot to locate the airplane. This option will not deal with a PCM receiver that has SAVE function allowed, or with low noise resistant PM receivers.

Specifications:

Continuous current: 70A with correct air circulation

Rise current: 110A (5sec)

Supporting motor types: 2~10 pole in/outrunner brushless motors

Supporting optimum RPM: 2 poles=>190,000; 6 poles=>63,000

Supporting input voltage: 5.5V~25.2V

Supporting battery types: Li-Poly 2~6 cells

BEC output voltage: 5-6V step-less adjustment

Continuous current: 3A

Burst current: 5A

Size: 65x31x18mm

Weight: 72g

Includes: (3) Align basic 4mm socket terminal (max current 110A)
(3) 5x28mm Heat diminish tube