Align DS615 Servo Gear Set

Get ALIGN DS615 Servo

Requirements:
DS615 gear G1x1
DS615 gear G2x1
DS615 gear G3x1
DS615 gear G4x1

Here is an additional item that compliments the item being gone over.

Skid Pipe

Apply to T-REX 550E.

Specifications:
Skid pipeline x 2(Φ7.4xΦ9x294mm)
Skid pipeline end cap x 4

The below item additionally pairs really well with the item being gone over.

600DFC Main Shaft Set

This is a replacement Align 600DFC Main Shaft Set, and is intended for use with an Align T-Rex 550E V2 or 600E PRO helicopter geared up with the optional Align 600DFC Main Rotor Head Upgrade Set (AGNH60239A).



Weight: 63g



Includes:

(2) 600DFC Main shaft
(2) 3x19mm Socket collar screw
(2) M3 nut


Here is a wonderful item that lots of others have actually bought at the exact same time.

550 3G Carbon Fiber Blades

Use for T-REX 550E Helicopter

Specification:
Shape: Symmetrical wing
Length:550x50x6.7mm
Width:12mm
Shaft Diameter:4mm
Weight:Appro 210g/set

This item is regularly acquired with the above discussed item.

M0.8 Torque Tube Front Drive Gear Set/34T

Use for T-REX 600PRO/600EFL PRO/550E

Specifications:
600PRO Front drive gear assembly x 1
600PRO Short umbrella gear x 1
600PRO Long umbrella gear x 1

Here is a wonderful item that lots of others have actually bought at the exact same time.

Torque Tube Rear Drive Gear Set

Use for T-REX 550/600 class.

Requirements:
Tail rotor shaft assembly x 1
Long umbrella gear x 1

This item compliments the main item below.

700 3G Carbon Fiber Blades

Use for T-REX 700 3G Flybaless System.

Directions:
The 700 3G primary blades are designed particularly for extreme 3D flying, including both high dexterity and excellent stability characteristics. The blades have brand brand-new airfoil design, coupled with brand-new painted graphics. In addition, the blades' rigidness have actually been increased for better anti-torsion characteristics throughout flight. The brand-new airfoil design effectively lessens turbulence at the blade pointers, decreasing blade sound and power loss.

Requirements:
Shape: Symmetrical wing
Length:700x60x8.05mm
Width:14mm
Shaft Diameter:5mm
Weight:Appro 380g/set

This is a wonderful addition to the item currently being gone over.

700E PRO DFC Anti Rotation Bracket

Use for T-REX 700E DFC.
New style swash anti-rotation guide with ingrained anti-wear material, effectively lessen the wear between swashplate long ball and guide.

Requirements:
700E PRO Matal Anti rotation bracket ? 1
Socket button head screw ? 2(M2.5x14mm)
Φ5 Long linkage ball(M3x4) ? 1(Φ5x29mm)

Here is a wonderful item that lots of others have actually bought at the exact same time.

104T M1 Autorotation tail drive gear set H70G007XX

Use for T-REX 700 Nitro.
Needs to with H7NG001AXW, M1 Torque Tube Front Drive Gear Set/21T.
Use for T-REX 700E/800E.
Needs to with H70G001AXW, M1 Torque Tube Front Drive Gear Set/22T

Specifications:
700N 104T M1 Autorotation tail drive gear set x 1
Gear Ratio 1:4.95

Numerous others have actually acquired this item in addition to the item that you are currently checking out.




Overview


Weighing simply 4 grams, the SH2060 can producing up to 11.4 oz-in of torque with transit times as low as .07 sec. This powerful combination of power and speed makes it an excellent option for ultra micro CP helis designed for 3D aerobatics.







Requirements


Size Category: Minis and Micros
Type: Digital
Application: Cyclic Servo: Helicopter
Torque: 9 oz-in @4.8V, 11.4 oz-in @6V
Speed: 0.08 sec/60 deg @ 4.8V; .07 sec/60 deg @ 6V, at no load
Length: 0.77 in (19.6mm)
Width: 0.32 in (8.15mm)
Height: 0.98 in (25mm)
Weight: 0.14 oz (4g)
Bushing Or Bearing: Bushing
Adapter Type: JST-ZHR adapter
Gear Type: Nylon
Gear Product: Nylon
Current Draw Idle: 2mA @ 4.8V; 0.18mA @ 6.0V
Current Draw Stall: 2.4mA @ 4.8V; 2.21mA @ 6.0V