Align DS615 Servo Gear Set

Make an application for ALIGN DS615 Servo

Requirements:
DS615 gear G1x1
DS615 gear G2x1
DS615 gear G3x1
DS615 gear G4x1

Below is an additional thing that compliments the thing being gone over.

Skid Pipe

Apply to T-REX 550E.

Specifications:
Skid pipeline x 2(Φ7.4xΦ9x294mm)
Skid pipeline end cap x 4

The below thing likewise pairs truly well with the thing being gone over.

600DFC Main Shaft Set

This is a replacement Align 600DFC Main Shaft Set, and is meant for usage with an Align T-Rex 550E V2 or 600E PRO helicopter geared up with the optional Align 600DFC Main Rotor Head Upgrade Set (AGNH60239A).



Weight: 63g



Includes:

(2) 600DFC Main shaft
(2) 3x19mm Socket collar screw
(2) M3 nut


Below is a wonderful thing that many others have actually purchased the exact same time.

550 3G Carbon Fiber Blades

Usage for T-REX 550E Helicopter

Requirements:
Forming: Symmetrical wing
Length:550x50x6.7mm
Width:12mm
Shaft Size:4mm
Weight:Appro 210g/set

This thing is regularly purchased with the above discussed thing.

M0.8 Torque Tube Front Drive Gear Set/34T

Usage for T-REX 600PRO/600EFL PRO/550E

Specifications:
600PRO Front drive gear assembly x 1
600PRO Short umbrella gear x 1
600PRO Long umbrella gear x 1

Below is a wonderful thing that many others have actually purchased the exact same time.

Torque Tube Rear Drive Gear Set

Usage for T-REX 550/600 class.

Requirements:
Tail rotor shaft assembly x 1
Long umbrella gear x 1

This thing compliments the main item here.

700 3G Carbon Fiber Blades

Usage for T-REX 700 3G Flybaless System.

Guidelines:
The 700 3G main blades are created particularly for severe 3D flying, featuring both high dexterity and exceptional stability qualities. The blades have brand name brand-new airfoil design, paired with brand-new painted graphics. In addition, the blades' rigidness have been increased for much better anti-torsion qualities during flight. The brand-new airfoil design effectively decreases turbulence at the blade pointers, reducing blade noise and power loss.

Requirements:
Forming: Symmetrical wing
Length:700x60x8.05mm
Width:14mm
Shaft Size:5mm
Weight:Appro 380g/set

This is a wonderful addition to the thing presently being gone over.

700E PRO DFC Anti Rotation Bracket

Usage for T-REX 700E DFC.
New design swash anti-rotation guide with embedded anti-wear material, effectively lessen the wear between swashplate long ball and guide.

Requirements:
700E PRO Matal Anti rotation bracket ? 1
Socket button head screw ? 2(M2.5x14mm)
Φ5 Long linkage ball(M3x4) ? 1(Φ5x29mm)

Below is a wonderful thing that many others have actually purchased the exact same time.

104T M1 Autorotation tail drive gear set H70G007XX

Usage for T-REX 700 Nitro.
Must with H7NG001AXW, M1 Torque Tube Front Drive Gear Set/21T.
Usage for T-REX 700E/800E.
Must with H70G001AXW, M1 Torque Tube Front Drive Gear Set/22T

Specifications:
700N 104T M1 Autorotation tail drive gear set x 1
Gear Ratio 1:4.95

Lots of others have actually purchased this thing together with the thing that you are presently checking out.




Introduction


Weighing just 4 grams, the SH2060 is capable of producing as much as 11.4 oz-in of torque with transit times as low as .07 sec. This potent mix of power and speed makes it an exceptional choice for ultra micro CP helis created for 3D aerobatics.







Requirements


Size Category: Minis and Micros
Type: Digital
Application: Cyclic Servo: Helicopter
Torque: 9 oz-in @4.8V, 11.4 oz-in @6V
Speed: 0.08 sec/60 deg @ 4.8V; .07 sec/60 deg @ 6V, at no load
Length: 0.77 in (19.6mm)
Width: 0.32 in (8.15mm)
Height: 0.98 in (25mm)
Weight: 0.14 oz (4g)
Bushing Or Bearing: Bushing
Port Type: JST-ZHR port
Gear Type: Nylon
Gear Material: Nylon
Current Draw Idle: 2mA @ 4.8V; 0.18mA @ 6.0V
Current Draw Stall: 2.4mA @ 4.8V; 2.21mA @ 6.0V