Align DS430M Servo Gear Set

Usage for DS430M servo.

Specs:
DS430M gear G1x1
DS430M gear G2x1
DS430M gear G3x1
DS430M gear G4x1
DS430M gear G5x1

Often gotten with the item that you are presently reviewing.

360 3G Carbon Fiber Blades

Apply to Trex450 all types

Specs:
Shape: In proportion wing
Length:360x33mm
Width:4.7mm
Shaft Diameter:3mm
Weight: Appro 54g/set

Numerous others have gotten this item along with the item that you are presently reviewing.

450L Torque Tube

Usage for T-REX 450L / other 450 series.
Must with:450L Tail Linkage Rod(H45T004XXW).

Specs:
Torque tube x 1
Torque tube end x 2
Torque tube bearing holder × 1
Bearing MR84ZZ x 1(F4xF8x3mm)
450L Tai boom x 1(F11xF12x387mm)
Max. impact torque:12~14kg.cm
Max. impact torque:166.68~194.46oz-in

The below item additionally sets truly well with the item being gone over.

450DFC Linkage Rod Set

Usage for T-REX 450DFC(H45162/45162QN).
Need to with H45165A

Specs:
450DFC Linkage rod A ? 4
450DFC Ball link ? 4

This item praises the main item below.

Torque Tube Rear Drive Gear Set

This is the Align Torque Tube Back Drive Gear Set for the T-Rex 450.

Features:

Black and silver colored
Made from metal and plastic
For the Align T-Rex 450

Includes:
One Align Torque Tube Back Drive Gear Set

Here is an additional item that praises the item being gone over.

Slant Thread Main Drive Gear/121T

Usage for T-REX 450 Series.
Need to with::H45157 Motor Pinion Helical Gear 12T.

Specs:
CNC M0.6 Slant Thread Main drive gear(121T) x 3
Weight:35.3g
Brand-new design high strength 121 tooth Mod 0.6 helical main hear for 450 size helis. The increase gear pitch can endure higher power, at the very same time minimize operational noise. A fantastic upgrade to endure the modern high power system.
Makes use of high strength polymer plastic with excellent rigidness and versatility characteristics.
Patented special built in fan design to develop induced air circulation, efficiently cooling electronics and motor.
Gear ratio 1:10.08.

Want an additional fantastic item to enhance the above pointed out item?

450DFC Main Shaft

Usage for T-REX 450DFC. H45162/162QN

Specs:
450DFC Main shaft x 2
Socket Button Head Collar Screw x 2(M2x12mm)
M2 nut x 2
Weight:33g

Numerous others have gotten this item along with the item that you are presently reviewing.

450L Tail Linkage Rod

Usage for T-REX 450 L / other 450 series.
Need to with: 450L Torque Tube(H45T005XXW).

Specs:
450L Rudder control x 1(Φ1.3x375mm)
Ball link x 2
Tail control guide x 2

Here is an additional item that praises the item being gone over.

Landing Skid

Specs:
Landing skid x 1
Washer x 2(Φ2.6xΦ5.8x0.6mm)
Socket button head screw x 2(M2.5x10mm)

Here is a fantastic item that several others have purchased the same time.

68 Tail Blade

Usage for T-REX 450.

Specs:
68mm Tail blade ? 2 pcs

This item praises the above gone over item.

600DFC Main Shaft Set

This is a replacement Align 600DFC Main Shaft Set, and is intended for use with an Align T-Rex 550E V2 or 600E PRO helicopter geared up with the optional Align 600DFC Main Rotor Head Upgrade Set (AGNH60239A).



Weight: 63g



Includes:

(2) 600DFC Main shaft
(2) 3x19mm Socket collar screw
(2) M3 nut


Get this item to improve the one you read around.

1/8" (3.1Mm) Heat Shrink Tubing (4 Red & 4 Black / Pkg)

This is a set of 1/8" size Heat Shrink Tubing from Dubro.

FEATURES:
Created to diminish approximately 1/2 of its original size
Suitable for insulating electrical splices, covering electrical plugs
and connectors

CONSISTS OF:
4 pieces of red heat diminish tubing
4 pieces of black heat diminish tubing

REQUIRES:
Diminish tubing on all sides with heat gun, butane lighter or soldering
iron

SPECS:
Diameter: 1/8" (3mm)
Length: 1-1/2" (38mm)

REMARKS:
Utilize a tubing size that disappears than two times the size of the
item being covered.