Align DS150/155 Servo Gear Set

Use for ALIGN DS150/155 Servo.

Specifications:
DS150/155 gear G1x1
DS150/155 gear G2x1
DS150/155 gear G3x1
DS150/155 gear G4x1
DS150/155 Servo rudder piece x 1
Socket button head self tapping scre x 1(T1.5x3mm)

Several others have actually purchased this product along with the product that you are currently checking out.

150 Main Shaft

Use for T-REX 150.

Specifications:
Main Shaft x 2(Φ1.6xΦ3x45.8mm)
Socket button head screw x 2(M2x4mm)

The listed below product also pairs really well with the product being discussed.

150 Feathering Shaft

Use for T-REX 150.

Specifications:
150 Feathering shaft x 3(Φ2x16.5mm)
Socket Button Head Screw x 6(#0-80x3mm)
100 Spacer x 6(Φ1.6x3.2x0.2mm)

Frequently purchased with the product that you are currently checking out.

DS150 Digital Servo

Ideal for T-Rex 150

Instructions:
4g digital micro servos are special design for T-REX 150 DFC, features to increase micro helicopter control speed and precision, let the micro/indoor helicopter has very same flight efficiency as large/outdoor helicopter.

Specifications:
Stall torque:0.8kg．cm(5V)
Motion speed:0.06 sec/60?(5V)
Score voltage:DC 4.8-6V
Dimension:19.8x8.4x23.3mm
Weight:4.3g
1520μs conventional band

Accessories:
DS150/155 Servo rudder piece x 1
Socket button head self tapping scre x 1(T1.5x3mm)

Get this product to boost the one you are reading around.

150 Landing Skid

Use for T-REX 150.

Specifications:
Landing Skid x 2
Landing Skid nut x 8(Φ1.5xΦ3x2mm)
Socket button head self tapping screw x 4(T1.5x3mm)

Right here is a excellent product that lots of others have actually purchased the very same time.

78T Main Drive Gear

Use for T-REX 100S/100X/150.

Specifications:
Main Drive Gear(78T) x 2

Frequently purchased with the product that you are currently checking out.

2S1P 7.4V 250mAh/30C

Use for T-REX 150.

Instruction::
Max Constant Discharge: 30C. Typical operating temperature is approx. 40-65?C(within 80% of ranked discharge). Max. temperature: 80?C.
Recommend to discharge the battery within 80% of ranked discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and efficiency will minimize due to high current, high temperature and over-discharge)

KEEP IN MIND::
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Releasing capacity can't go beyond 80% of limit capacity after complete crediting ensure a good cycle performance.Recommend to complete charge a brand name new battery before using and just discharge the battery 50% for very first 5 times to make a good efficiency of the battery. Please make it a practice to constantly count time for flight, or please set a low voltage security on ESC (Cell voltage after stopping using can not decrease than 3.4V). Do not utilize the battery at insufficient of voltage.

Do not expose batteries to sunlight or shop/ charge batteries at the temperature up to 35℃ in a airtight vehicle. The environment high temperature could cause the damage or the risk of burst. If the battery ends up being hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 minutes), then examine to recharge. If versus follow the initial factory using rules, potentially cause the battery to pump up or any harmful accident takes place.
Do not leave the battery charger is running unattended as it might cause a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Dimension:47x21.5x12mm
Weight:15g