Align Cnc Slant Thread Main Drive Gear/ 112T

Usage for T-REX 550E.
Need to with CNC Slant Thread Main Drive Gear/112T(H60G001XXW).

Specs:
Motor pinion gear 10T x 1
M4 set screw x 2(M4x4mm)

Numerous others have purchased this thing along with the thing that you are presently reviewing.

M0.8 Torque Tube Front Drive Gear Set/34T

Usage for T-REX 600PRO/600EFL PRO/550E

Specifications:
600PRO Front drive gear assembly x 1
600PRO Short umbrella gear x 1
600PRO Long umbrella gear x 1

Numerous others have purchased this thing along with the thing that you are presently reviewing.

Torque Tube Rear Drive Gear Set

Usage for T-REX 550/600 class.

Specs:
Tail rotor shaft assembly x 1
Long umbrella gear x 1

Frequently purchased with the thing that you are presently reviewing.

550 3G Carbon Fiber Blades

Usage for T-REX 550E Helicopter

Requirements:
Forming: Balanced wing
Length:550x50x6.7mm
Width:12mm
Shaft Diameter:4mm
Weight:Appro 210g/set

This is a wonderful enhancement to the thing presently being reviewed.

Skid Pipe

Apply to T-REX 550E.

Specs:
Skid pipe x 2(Φ7.4xΦ9x294mm)
Skid pipe end cap x 4

Frequently purchased with the thing that you are presently reviewing.

Torque Tube

Usage for T-REX 550E.

Specs:
Torque tube x 1
Bearing MR148ZZ x 1(Φ8xΦ14x4mm)

Want one more fantastic thing to match the above stated thing?

M0.8 Torque Tube Front Drive Gear Set (34T)

This is an Align M0.8, 34 Tooth Torque Tube Front Drive Gear Set, and is meant for usage with the Align T-Rex 550 V2 and 600 Pro helicopters.
Includes:
(1) Modulus: 0.8 Front drive gear assembly (4x4.5x51mm)
(1) Front umbrella gear (20T) (21.2x33.6mm)
(1) Tail umbrella gear (20T) (21.2x12.5mm)

Note: In order to use this torque tube drive gear set on a T-REX 550, the helicopter needs to be geared up with the inclined gear setup. To figure out if your helicopter utilizes inclined gears or straight-cut gears, observe the main drive gear which will either have actually inclined or straight-cut teeth.



This thing praises the main item here.

700F3C Landing Skid

Usage for T-REX 550E/600E/600N/700E/700N.

Specs:
700F3C Landing skid x 2

Below is a fantastic thing that lots of others have purchased the exact same time.

Tail Boom (Black)

Specs:
Tail boom x 2(Φ20xΦ21.5x625mm)
Tail control guide x 2
Rudder control rod(B) x 1(Φ2x657mm)
Boll link x 2

Below is one more thing that praises the thing being reviewed.

DS615 Servo Gear Set

Obtain ALIGN DS615 Servo

Specs:
DS615 gear G1x1
DS615 gear G2x1
DS615 gear G3x1
DS615 gear G4x1

You will like this product if you have the product earlier mentioned.

Hook & Loop Fastening Tape

Specifications:
Hook & Loop attaching tape x 2 (20x360mm)

Below is a fantastic thing that lots of others have purchased the exact same time.

Torque Tube

Usage for T-REX 600/600 Nitro
550E DFC
***Does not fit 550L Dominator.

Includes
Torque tube x 1
Bearing MR148ZZ x 1(F8xF14x4mm)

This thing praises the above reviewed thing.

131T M0.8 Autorotation Tail Drive Gear

This is a replacement Align 131 Tooth M0.8 Autorotation Tail Drive Gear, and is meant for usage with the Align 550, and 600E Pro.






Below is a fantastic thing that lots of others have purchased the exact same time.

Tail Boom

Obtain T-REX 550E

Specifications:
Tail boom x 2(Φ20.3xΦ21.5x549mm)
Tail control guide x 2
Rudder control rod x 1(Φ1.96x575mm)
Ball Link x 2

Get this thing to improve the one you are reading about.

131T M0.8 Autorotation Tail Drive Gear-Black

Suitable for T-REX 550E/600E PRO/600EFL PRO.
Suitable with:
600PRO Main Gear Case Set(H60200)
One-way Bearing Shaft(H60139A)
Torque Tube Front Drive Gear Set(H60228)

Specs:
Autorotation Tail Drive Gear-Black(131T,M0.8) x 1