Align Cnc Slant Thread Main Drive Gear/ 112T

Use for T-REX 550E.
Should with CNC Slant Thread Main Drive Gear/112T(H60G001XXW).

Specifications:
Motor pinion gear 10T x 1
M4 set screw x 2(M4x4mm)

Many others have acquired this product together with the product that you are presently reading about.

M0.8 Torque Tube Front Drive Gear Set/34T

Use for T-REX 600PRO/600EFL PRO/550E

Specifications:
600PRO Front drive gear assembly x 1
600PRO Short umbrella gear x 1
600PRO Long umbrella gear x 1

Many others have acquired this product together with the product that you are presently reading about.

Torque Tube Rear Drive Gear Set

Use for T-REX 550/600 class.

Specifications:
Tail rotor shaft assembly x 1
Long umbrella gear x 1

Frequently acquired with the product that you are presently reading about.

550 3G Carbon Fiber Blades

Use for T-REX 550E Helicopter

Specification:
Shape: Symmetrical wing
Length:550x50x6.7mm
Width:12mm
Shaft Size:4mm
Weight:Appro 210g/set

This is a amazing enhancement to the product presently being discussed.

Skid Pipe

Apply to T-REX 550E.

Specifications:
Skid pipeline x 2(Φ7.4xΦ9x294mm)
Skid pipeline end cap x 4

Frequently acquired with the product that you are presently reading about.

Torque Tube

Use for T-REX 550E.

Specifications:
Torque tube x 1
Bearing MR148ZZ x 1(Φ8xΦ14x4mm)

Want one more wonderful product to enhance the above pointed out product?

M0.8 Torque Tube Front Drive Gear Set (34T)

This is an Align M0.8, 34 Tooth Torque Tube Front Drive Gear Set, and is intended for use with the Align T-Rex 550 V2 and 600 Pro helicopters.
Includes:
(1) Modulus: 0.8 Front drive gear assembly (4x4.5x51mm)
(1) Front umbrella gear (20T) (21.2x33.6mm)
(1) Tail umbrella gear (20T) (21.2x12.5mm)

Note: In order to use this torque tube drive gear set on a T-REX 550, the helicopter should be equipped with the slanted gear setup. To figure out if your helicopter utilizes slanted gears or straight-cut gears, observe the main drive gear which will either have slanted or straight-cut teeth.



This product compliments the main item right here.

700F3C Landing Skid

Use for T-REX 550E/600E/600N/700E/700N.

Specifications:
700F3C Landing skid x 2

Below is a wonderful product that lots of others have bought at the same time.

Tail Boom (Black)

Specifications:
Tail boom x 2(Φ20xΦ21.5x625mm)
Tail control guide x 2
Rudder control rod(B) x 1(Φ2x657mm)
Boll link x 2

Below is one more product that compliments the product being discussed.

DS615 Servo Gear Set

Apply for ALIGN DS615 Servo

Specifications:
DS615 gear G1x1
DS615 gear G2x1
DS615 gear G3x1
DS615 gear G4x1

You will enjoy this product if you have the product earlier stated.

Hook & Loop Fastening Tape

Specifications:
Hook & Loop securing tape x 2 (20x360mm)

Below is a wonderful product that lots of others have bought at the same time.

Torque Tube

Use for T-REX 600/600 Nitro
550E DFC
***Does not fit 550L Dominator.

Includes
Torque tube x 1
Bearing MR148ZZ x 1(F8xF14x4mm)

This product compliments the above discussed product.

131T M0.8 Autorotation Tail Drive Gear

This is a replacement Align 131 Tooth M0.8 Autorotation Tail Drive Gear, and is intended for use with the Align 550, and 600E Pro.






Below is a wonderful product that lots of others have bought at the same time.

Tail Boom

Apply for T-REX 550E

Specifications:
Tail boom x 2(Φ20.3xΦ21.5x549mm)
Tail control guide x 2
Rudder control rod x 1(Φ1.96x575mm)
Ball Link x 2

Get this product to enhance the one you read around.

131T M0.8 Autorotation Tail Drive Gear-Black

Suitable for T-REX 550E/600E PRO/600EFL PRO.
Suitable with:
600PRO Main Gear Case Set(H60200)
One-way Bearing Shaft(H60139A)
Torque Tube Front Drive Gear Set(H60228)

Specifications:
Autorotation Tail Drive Gear-Black(131T,M0.8) x 1