Align Cnc Slant Thread Main Drive Gear/ 112T

Usage for T-REX 550E.
Must with CNC Slant Thread Main Drive Gear/112T(H60G001XXW).

Specifications:
Motor pinion gear 10T x 1
M4 set screw x 2(M4x4mm)

Lots of others have actually purchased this product along with the product that you are currently checking out.

M0.8 Torque Tube Front Drive Gear Set/34T

Usage for T-REX 600PRO/600EFL PRO/550E

Specifications:
600PRO Front drive gear assembly x 1
600PRO Short umbrella gear x 1
600PRO Long umbrella gear x 1

Lots of others have actually purchased this product along with the product that you are currently checking out.

Torque Tube Rear Drive Gear Set

Usage for T-REX 550/600 class.

Specifications:
Tail rotor shaft assembly x 1
Long umbrella gear x 1

Regularly purchased with the product that you are currently checking out.

550 3G Carbon Fiber Blades

Usage for T-REX 550E Helicopter

Spec:
Forming: In proportion wing
Length:550x50x6.7mm
Width:12mm
Shaft Diameter:4mm
Weight:Appro 210g/set

This is a amazing addition to the product currently being talked about.

Skid Pipe

Apply to T-REX 550E.

Specifications:
Skid pipeline x 2(Φ7.4xΦ9x294mm)
Skid pipeline end cap x 4

Regularly purchased with the product that you are currently checking out.

Torque Tube

Usage for T-REX 550E.

Specifications:
Torque tube x 1
Bearing MR148ZZ x 1(Φ8xΦ14x4mm)

Want one more great product to compliment the above mentioned product?

M0.8 Torque Tube Front Drive Gear Set (34T)

This is an Align M0.8, 34 Tooth Torque Tube Front Drive Gear Set, and is meant for usage with the Align T-Rex 550 V2 and 600 Pro helicopters.
Includes:
(1) Modulus: 0.8 Front drive gear assembly (4x4.5x51mm)
(1) Front umbrella gear (20T) (21.2x33.6mm)
(1) Tail umbrella gear (20T) (21.2x12.5mm)

Note: In order to utilize this torque tube drive gear set on a T-REX 550, the helicopter must be geared up with the inclined gear setup. To identify if your helicopter uses inclined gears or straight-cut gears, observe the main drive gear which will either have inclined or straight-cut teeth.



This product compliments the main item here.

700F3C Landing Skid

Usage for T-REX 550E/600E/600N/700E/700N.

Specifications:
700F3C Landing skid x 2

Below is a great product that numerous others have actually bought at the same time.

Tail Boom (Black)

Specifications:
Tail boom x 2(Φ20xΦ21.5x625mm)
Tail control guide x 2
Rudder control rod(B) x 1(Φ2x657mm)
Boll link x 2

Below is one more product that compliments the product being talked about.

DS615 Servo Gear Set

Get ALIGN DS615 Servo

Specifications:
DS615 gear G1x1
DS615 gear G2x1
DS615 gear G3x1
DS615 gear G4x1

You will like this thing if you have the thing above discussed.

Hook & Loop Fastening Tape

Specifications:
Hook & Loop attaching tape x 2 (20x360mm)

Below is a great product that numerous others have actually bought at the same time.

Torque Tube

Usage for T-REX 600/600 Nitro
550E DFC
***Does not fit 550L Dominator.

Includes
Torque tube x 1
Bearing MR148ZZ x 1(F8xF14x4mm)

This product compliments the above talked about product.

131T M0.8 Autorotation Tail Drive Gear

This is a replacement Align 131 Tooth M0.8 Autorotation Tail Drive Gear, and is meant for usage with the Align 550, and 600E Pro.






Below is a great product that numerous others have actually bought at the same time.

Tail Boom

Get T-REX 550E

Specifications:
Tail boom x 2(Φ20.3xΦ21.5x549mm)
Tail control guide x 2
Rudder control rod x 1(Φ1.96x575mm)
Ball Link x 2

Get this product to improve the one you read about.

131T M0.8 Autorotation Tail Drive Gear-Black

Ideal for T-REX 550E/600E PRO/600EFL PRO.
Ideal with:
600PRO Main Gear Case Set(H60200)
One-way Bearing Shaft(H60139A)
Torque Tube Front Drive Gear Set(H60228)

Specifications:
Autorotation Tail Drive Gear-Black(131T,M0.8) x 1