Align Castle EDGE HV 80 Brushless ESC

Will be readily available soon.



Guidelines:
The brand-new Castle Edge ESC supply New Phoenix Controller AUX Line within more choices as below:
a. Gain input-
Permit the ESC to utilize an extra receiver channel to adjust the governor gain.
b. RPM out-
Toggles the AUX Line for every single electrical commutation. Divide this number by your variety of magnetic pole sets for mechanical RPM.
c. Extreme load detection-
Avoid damage triggered by big current spikes typically triggered by too much load or possibly a brief in the motor wires.
d. Audible Beacon-
The controller will discharge an audible locator signal from the motor when the AUX LINE is above 50% signal.
The beacon is only given off if the motor is not running
e. Log Data Reset Percentage-
The users might pick a percentage of the data buffer which all data is erased upon ESC boot up.
This assists to guarantee that the most current flight is logged.
Comprehensive heli include set, consisting of direct entry governor mode, autorotation with bailout, and soft start abilities to safeguard your tailoring (see the screenshot on the right for more information).
Opto separated throttle cable helps in reducing radio interference.
Full data logging abilities. Step amp draw, controller temperature, motor rpms, battery voltage and ripple and more. Take the mystery from electrical flight.

Requirements:
Surge current:80Amps
Supporting motor types:2 poles to 10+poles in/outrunner brushless motors
Max Supporting input voltage:50v(12s Li-Po/36 cells Nicad/NiMH)
Size:71X33X22.9mm
Weight:121g(With wires)
Please download the
lastest version for your Castle Link

NOTE: Not consisting of BEC. User need to supply the power for receiver and servo.