Align Castle EDGE HV 80 Brushless ESC

Will be readily available soon.



Guidelines:
The new Castle Edge ESC provide New Phoenix Controller AUX Line within more options as listed below:
a. Gain input-
Allow the ESC to utilize an extra receiver channel to adjust the governor gain.
b. RPM out-
Toggles the AUX Line for every electrical commutation. Divide this number by your number of magnetic pole pairs for mechanical RPM.
c. Excessive load detection-
Prevent damage triggered by large current spikes usually triggered by too much load or perhaps a short in the motor wires.
d. Audible Beacon-
The controller will emit an audible locator signal from the motor when the AUX LINE is above 50% signal.
The beacon is just produced if the motor is not running
e. Log Data Reset Percentage-
The users might select a portion of the information buffer which all information is erased upon ESC boot up.
This helps to make sure that the most recent flight is logged.
Comprehensive heli feature set, consisting of direct entry governor mode, autorotation with bailout, and soft start capabilities to safeguard your tailoring (see the screenshot on the right for more information).
Opto separated throttle cable television helps in reducing radio disturbance.
Complete information logging capabilities. Procedure amp draw, controller temperature, motor rpms, battery voltage and ripple and more. Take the secret from electric flight.

Specifications:
Surge current:80Amps
Supporting motor types:2 poles to 10+poles in/outrunner brushless motors
Max Supporting input voltage:50v(12s Li-Po/36 cells Nicad/NiMH)
Size:71X33X22.9mm
Weight:121g(With wires)
Please download the
lastest version for your Castle Link

KEEP IN MIND: Not consisting of BEC. User need to provide the power for receiver and servo.