Align Castle EDGE HV 160 Brushless ESC

Instructions:
The new Castle Edge ESC provide Brand-new Phoenix Controller AUX Line within more options as below:
a. Gain input-
Permit the ESC to utilize an additional receiver channel to adjust the guv gain.
b. RPM out-
Toggles the AUX Line for every electrical commutation. Divide this number by your variety of magnetic pole sets for mechanical RPM.
c. Extreme load detection-
Prevent damage brought on by big current spikes usually brought on by too much load or potentially a short in the motor wires.
d. Audible Beacon-
The controller will release an audible locator signal from the motor when the AUX LINE is above 50% signal.
The beacon is only discharged if the motor is not running
e. Log Data Reset Portion-
The users might select a portion of the information buffer which all information is removed upon ESC boot up.
This assists to make sure that the most current flight is logged.
Comprehensive heli include set, consisting of direct entry guv mode, autorotation with bailout, and soft start abilities to protect your tailoring (see the screenshot on the right for more information).
Opto isolated throttle cable television helps in reducing radio interference.
Full information logging abilities. Measure amp draw, controller temperature level, motor rpms, battery voltage and ripple and more. Take the mystery out of electrical flight.

Specifications:
Rise current:160Amps
Supporting motor types:2 poles to 10+poles in/outrunner brushless motors
Max Supporting input voltage:50V(12s Li-Po/36 cells Nicad/NiMH)
Size:111X52X30.6mm
Weight:224g(With wires)
Please download the
lastest version for your Castle Link

KEEP IN MIND: Not consisting of BEC. User need to provide the power for receiver and servo.