Align Castle EDGE HV 120 Brushless ESC

Guidelines:
The brand-new Castle Edge ESC offer New Phoenix Controller AUX Line within more options as below:
a. Gain input-
Permit the ESC to utilize an additional receiver channel to change the governor gain.
b. RPM out-
Toggles the AUX Line for each electrical commutation. Divide this number by your number of magnetic pole pairs for mechanical RPM.
c. Extreme load detection-
Avoid damage triggered by large existing spikes usually triggered by excessive load or perhaps a brief in the motor wires.
d. Audible Beacon-
The controller will release an audible locator signal from the motor when the AUX LINE is above 50% signal.
The beacon is just released if the motor is not running
e. Log Data Reset Portion-
The users might pick a portion of the data buffer which all data is removed upon ESC boot up.
This helps to guarantee that the most current flight is logged.
Comprehensive heli feature set, including direct entry governor mode, autorotation with bailout, and soft start abilities to secure your tailoring (see the screenshot on the right for more details).
Opto separated throttle cable television helps reduce radio disturbance.
Full data logging abilities. Measure amp draw, controller temperature, motor rpms, battery voltage and ripple and more. Take the secret out of electrical flight.

Specs:
Rise existing:120Amps
Supporting motor types:2 poles to 10+poles in/outrunner brushless motors
Max Supporting input voltage:50V(12s Li-Po/36 cells Nicad/NiMH)
Size:86.6X50.6X23.2mm
Weight:148g(With wires)
Please download the
lastest variation for your Castle Link

KEEP IN MIND: Not including BEC. User have to offer the power for receiver and servo.