Align Bearing(684ZZ)

Usage for T-REX 500/600.
Specifications:
Bearing 684ZZ x 2(Φ4xΦ9x4mm)
EZO Made in Japan

Right here is a wonderful thing that several others have bought at the same time.

Bearing(6701ZZ)

Usage for T-REX 550E/600/600 Nitro。
Usage for 600 Torque Tube Drive Assembly.

Specifications:
Bearing 6701ZZ x 4(Φ12xΦ18x4mm)

This thing compliments the above gone over thing.



This is a pair of Midwest .057 x .177" x 40" Carbon Fiber Strips.

FEATURES:
Perfect for stiffening R/C car chassis, enhancing hinge points
    on foam park flyers or enhancing structures constructed for science
    or engineering projects
40% lighter than aluminum

INCLUDES:
Two Midwest .057 x .177" x 40" Carbon Fiber Strips

REQUIRES:
Cutting (abrasive cut-off wheel recommended) depending on application

SPECS:
Length: 40" (1016mm)
Width: .177" (4.5m)
Thickness: .057" (1.4mm)
Weight: 0.008oz (.241g) per inch

COMMENTS:
When cutting carbon fiber, avoid side cutters as these can crush the
    rods and different fibers. Always wear safety goggles and gloves
    when cutting or sanding carbon fiber.

This thing compliments the main item here.

M0.6 Torque Tube Front Drive Gear Set / 40T

This is Align's Torque Tube Front Drive Equipment Set for the T-Rex 600N, 600E, and 550 Helicopters, M0.6 40T. This Equipment set should be utilized with the Align Autorotation Tail Drive Equipment Set (AGNH60020A).

Features:

Black and silver colored
Made of plastic and metal
For the Align T-Rex 600N, 600E, and 550

Consists of:
One Align Front Drive Equipment Assembly and One Long Umbrella Equipment

Requires:
Align Autorotation Tail Drive Equipment Set (AGNH60020A)