Align Bearing(684ZZ)

Use for T-REX 500/600.
Specs:
Bearing 684ZZ x 2(Φ4xΦ9x4mm)
EZO Made in Japan

Below is a wonderful product that numerous others have purchased the very same time.

Bearing(6701ZZ)

Use for T-REX 550E/600/600 Nitro。
Use for 600 Torque Tube Drive Assembly.

Specifications:
Bearing 6701ZZ x 4(Φ12xΦ18x4mm)

This product praises the above discussed product.



This is a set of Midwest .057 x .177" x 40" Carbon Fiber Strips.

FEATURES:
Suitable for stiffening R/C vehicle chassis, strengthening hinge points
    on foam park flyers or strengthening structures built for science
    or engineering jobs
40% lighter than aluminum

INCLUDES:
2 Midwest .057 x .177" x 40" Carbon Fiber Strips

REQUIRES:
Cutting (abrasive cut-off wheel advised) depending upon application

SPECIFICATIONS:
Length: 40" (1016mm)
Width: .177" (4.5m)
Thickness: .057" (1.4mm)
Weight: 0.008oz (.241g) per inch

REMARKS:
When cutting carbon fiber, avoid side cutters as these can squash the
    rods and separate fibers. Constantly use security goggles and gloves
    when cutting or sanding carbon fiber.

This product praises the main item here.

M0.6 Torque Tube Front Drive Gear Set / 40T

This is Align's Torque Tube Front Drive Gear Set for the T-Rex 600N, 600E, and 550 Helicopters, M0.6 40T. This Gear set must be used with the Align Autorotation Tail Drive Gear Set (AGNH60020A).

Features:

Black and silver colored
Made from plastic and metal
For the Align T-Rex 600N, 600E, and 550

Includes:
One Align Front Drive Gear Assembly and One Long Umbrella Gear

Requires:
Line up Autorotation Tail Drive Gear Set (AGNH60020A)