Align Ball Link

Usage for T-REX 500/600/600 Nitro.

Specifications:
Ball link-Black x 12
Elevator ball link x 1

Several others have actually gotten this product together with the product that you are presently reviewing.

M0.8 Torque Tube Front Drive Gear Set (34T)

This is an Align M0.8, 34 Tooth Torque Tube Front Drive Gear Set, and is meant for usage with the Align T-Rex 550 V2 and 600 Pro helicopters.
Includes:
(1) Modulus: 0.8 Front drive gear assembly (4x4.5x51mm)
(1) Front umbrella gear (20T) (21.2x33.6mm)
(1) Tail umbrella gear (20T) (21.2x12.5mm)

Note: In order to use this torque tube drive gear set on a T-REX 550, the helicopter must be geared up with the slanted gear setup. To determine if your helicopter uses slanted gears or straight-cut gears, observe the main drive gear which will either have slanted or straight-cut teeth.



Several others have actually gotten this product together with the product that you are presently reviewing.

520 Carbon Fiber Blade Set (550E)

This is an optional Align 520mm Carbon Fiber Main Blade Set, and is meant for usage with the Align T-Rex 550 helicopter.


Specifications:

Forming: In proportion wing

Length: 520x48x6.5mm

Width: 12mm

Shaft Size: 4mm

Weight: 200g/set



This is a great addition to the product presently being reviewed.

6800ZZ Metal Rotor Holder Bearing Set (4)

This is a replacement Align 6800ZZ Metal Rotor Holder Bearing Set, and is meant for usage with the Align T-Rex 700 Helicopter. 
Includes:

(4) 10x19x5mm Metal Protected Bearings





Here is another product that praises the product being reviewed.



The new DELUXE swashplate leveler is designed to level the swashplate without eyeballing and thinking, permitting you to call in the helicopter with terrific precision & precision. This swashplate leveler is utilized for T-REX 700 Nitro helicopters, and is specifically designed for the swashplate of the Trex 700N. Due to its heavy weight, this new version is designed with a leading finger rest, along with an ergonomic handle to falcilitate the leveling job.

The NEW DELUXE swashplate leveler is made from aircraft aluminum 6061-T6, and is CNC machined with the greatest tolerances to eliminate any play in between the main shaft and swashplate leveler, which can cause an incorrectly leveled swashplate. The NEW DELUXE swashplate leveler is likewise anodized in silver to avoid corrosion.

Designed to work with a 12mm Main Shaft.

Designed in the USA.
Specifications:

Length: 38mm
Main Shaft hole: 12mm

Click here to download manual !

This is a great addition to the product presently being reviewed.

Servo line Color Black and Red

Seeking to tidy up the look of your helicopter, aircraft of RC automobile & safeguard your servo lines from chaffing? Servo Line Covering is an easy way to safeguard your servo wires, including a clean, visual aim to your RC machine, and can be set up in a matter of minutes. Select from our interesting line of different colors to include an entire make over to your RC machine!

Included In Bundle:

(1) 1M (3.28 ft.) Servo Line Covering

(1) 9 in. Heat Shrink Wrap

How Do I Set up Servo Line Covering?

Simply remove your servo(s) from the receiver, measure the length of covering you will need for your servo wire(s), and open one end of the covering and place the servo terminal within. It works best to “inch worm” your servo wire by holding the terminal inside the servo covering, and gradually inching the covering over the terminal, and pushing the terminal forward.

Once your servo wire is covered, cut off a proper sized piece of the consisted of heat shrink, and slide it over the covering till it is flush with the servo itself. Heat the shrink wrap with a soldering iron or heat weapon to shrink it down around the covering, therefore giving you a flush, tight fit over the previously frayed servo covering. Do the very same with the end of your servo wire, being careful to leave the terminal bare so it can quickly connected into your receiver. Also, be sure to remember of the servo wire polarity if you cover the complete wire – this will make sure that you will know exactly what direction to plug your servo terminal into your receiver.