Align Ball Link

Use for T-REX 500/600/600 Nitro.

Specifications:
Ball link-Black x 12
Elevator ball link x 1

Many others have gotten this product together with the product that you are currently reading about.

M0.8 Torque Tube Front Drive Gear Set (34T)

This is an Align M0.8, 34 Tooth Torque Tube Front Drive Gear Set, and is meant for use with the Align T-Rex 550 V2 and 600 Pro helicopters.
Includes:
(1) Modulus: 0.8 Front drive gear assembly (4x4.5x51mm)
(1) Front umbrella gear (20T) (21.2x33.6mm)
(1) Tail umbrella gear (20T) (21.2x12.5mm)

Note: In order to use this torque tube drive gear set on a T-REX 550, the helicopter must be geared up with the slanted gear setup. To figure out if your helicopter utilizes slanted gears or straight-cut gears, observe the primary drive gear which will either have actually slanted or straight-cut teeth.



Many others have gotten this product together with the product that you are currently reading about.

520 Carbon Fiber Blade Set (550E)

This is an optional Align 520mm Carbon Fiber Main Blade Set, and is meant for use with the Align T-Rex 550 helicopter.


Specs:

Shape: Symmetrical wing

Length: 520x48x6.5mm

Width: 12mm

Shaft Size: 4mm

Weight: 200g/set



This is a amazing addition to the product currently being reviewed.

6800ZZ Metal Rotor Holder Bearing Set (4)

This is a replacement Align 6800ZZ Metal Rotor Holder Bearing Set, and is meant for use with the Align T-Rex 700 Helicopter. 
Includes:

(4) 10x19x5mm Metal Protected Bearings





Right here is an additional product that compliments the product being reviewed.



The brand-new DELUXE swashplate leveler is designed to level the swashplate without eyeballing and guessing, allowing you to dial in the helicopter with fantastic accuracy & precision. This swashplate leveler is used for T-REX 700 Nitro helicopters, and is particularly designed for the swashplate of the Trex 700N. Due to its heavy weight, this brand-new version is designed with a leading finger rest, together with an ergonomic handle to falcilitate the leveling job.

The NEW DELUXE swashplate leveler is made of airplane aluminum 6061-T6, and is CNC machined with the highest tolerances to get rid of any play in between the primary shaft and swashplate leveler, which can lead to a poorly leveled swashplate. The NEW DELUXE swashplate leveler is also anodized in silver to prevent corrosion.

Designed to deal with a 12mm Main Shaft.

Designed in the USA.
Specifications:

Length: 38mm
Main Shaft hole: 12mm

Click here to download manual !

This is a amazing addition to the product currently being reviewed.

Servo line Color Black and Red

Wanting to clean up the appearance of your helicopter, airplane of RC automobile & safeguard your servo lines from chaffing? Servo Line Covering is an easy way to safeguard your servo wires, including a tidy, visual seek to your RC maker, and can be set up in a matter of minutes. Choose from our amazing line of different colors to include a whole new look to your RC machine!

Included In Package:

(1) 1M (3.28 ft.) Servo Line Covering

(1) 9 in. Heat Shrink Wrap

How Do I Set up Servo Line Covering?

Simply eliminate your servo(s) from the receiver, measure the length of covering you will need for your servo wire(s), and open one end of the covering and insert the servo terminal within. It works best to “inch worm” your servo wire by holding the terminal inside the servo covering, and gradually inching the covering over the terminal, and pushing the terminal forward.

Once your servo wire is covered, cut off a suitable sized piece of the consisted of heat shrink, and slide it over the covering till it is flush with the servo itself. Heat the shrink wrap with a soldering iron or heat weapon to shrink it down around the covering, hence offering you a flush, tight fit over the previously frayed servo covering. Do the exact same with the end of your servo wire, taking care to leave the terminal bare so it can easily plug into your receiver. Likewise, make sure to keep in mind of the servo wire polarity if you cover the full wire – this will guarantee that you will know what instructions to plug your servo terminal into your receiver.