Align APS Gyro

Instructions:
APS Gyro is an electronic flight augmentation device, and can only operate when used with Align's 3GX flybarless system. With APS gyro set up, the helicopter will have the capability to self stabilize, hold position along with elevation, as well as self-governing way point flights along with return house. It is the best tool for flight training, along with aerial photography applications.

Functions of Align APS Gyro:
1.Semi-autonomous remove / Landing.
2.Indicate point automatic flights.
3.Emergency situation bailout stabilization.
4.Failsafe:Automatic return house during loss of signal scenario.
5.Simple rational setting through transmitter.
6.Supports software application upgrades.

Functions::
Align APS has integrate in 3-axis accelerometer, 3-axis magnetic compass, altimeter, and GPS sensor to deal with DSP processor to make it possible for APS to have precise detection and control abilities.
For use with Align's 3GX flybarless system for ease of install and simplified setup, APS is practical with a few setup steps.
Multi flight mode and multi navigate functions. Which is the system with many modes and functions in the current market.
Failsafe function, When helicopter lose RC signal, APS will take control of and fly the helicopter back to where the helicopter regains RC signal.
Automatically helicopter stabilize function. When helicopter's attitude is not stable, switch to APS Mode will make it possible for APS to instantly stabilize helicopter and provide a huge assistance for the novices.
Supports Spektrum/JR satellite receivers and Futaba S.BUS architecture.
Supports software application upgrades.

Specs:
Appropriate Voltage Variety:DC 3.5~8.4V
Operating current intake:<200mA @4.8V
Operating temperatur:-20℃~65℃
Operating humidity:0%~95%
RoHS certified
Hovering Precision (Depending on satellite status):
Horizontal ?1m
Vertical ?1m
APS Cotrol unit Dimension/Weight:
35.4x27.9x17mm / 14.8g
APS Sensor Dlmension/Weight:
29.5x26.3x10.8mm / 12.7g

Accessories:
APS Control Unit ? 1
APS Sensor ? 1
APS gyro anti-vibration foam ? 6(34x9x3mm)
APS sensor mount ? 1(34.5x30x6mm)
APS sensor mounting platform tailboom clamp (550-700) ? 1
APS sensor mounting platform tailboom clamp (500) ? 1
APS sensor mounting platform tailboom clamp (450) ? 1
APS controller vibration dampening metal plate ? 1(35.4x27.9x3mm)
Signal Y-adapter ? 1
APS Signal wire ? 1(350mm)
GPS Signal wire ? 1(160mm)
Self tapping screw ? 2(T2x10mm)
Self tapping screw ? 2(T2.6x10mm)
Self tapping screw ? 2(T3x12mm)
Gyro foam ? 1 (3M 24x24x2mm)
Plastic flat screwdriver ? 1(Φ3xΦ7x40mm)