Align 700 Tail Boom Brace

Use for T-REX 700 Nitro Pro /700E.
Requirements:
Tail boom brace end x 4
M4 washer x 4(Φ4xΦ10x1mm)
Tail boom brace x 2(Φ3xΦ6x600mm)
Socket screw x 2(M4x12mm)
Socket screw x 2(M4x16mm)

This item compliments the above talked about item.

Torque Tube

Use for T-REX 700 Nitro Pro /700E.
Requirements:
Torque tube x 1
Torque tube end x 2
Bearing MR148ZZ x 2(Φ8xΦ14x4mm)
Torque tube pin guide x 2(Φ8x12.5x7mm)
Pin x 2(Φ2.5x9.8mm)

Want another wonderful item to compliment the above pointed out item?

Tail Control Guide

Use for T-REX 700E F3C.

Requirements:
Tail Control Guide x 4 (Φ21.5xΦ26x46.85mm)
Socket button head self tapping screw x 4 (T4 x 10mm)

Here is another item that compliments the item being talked about.

Skid Pipe Set (Silver)

This is a replacement Align Skid Pipe Set, and is intended for usage with the Align T-Rex 700 family of helicopters.



Includes:
(2) Skid pipe (9x325mm)
(4) Skid pipe end cap

You will certainly enjoy this thing if you have the thing just above discussed.

Landing Skid

Use for T-REX 550E/600E/600N/700E/700N.

Requirements:
Landing skid x 2

This item compliments the above talked about item.

M3 CNC socket collar screw

Requirements:
M3 CNC socket collar screw ? 4 (M3x24mm)
Weight:6.9g

Want another wonderful item to compliment the above pointed out item?

Torque Tube Rear Drive Gear Set

Use for T-REX 700E.

Requirements:
Front drive gear assembly x 1(Φ6xΦ7x82.7mm)
Long umbrella gear x 1
Tail Rotor Center ? 1(Φ12x43.4mm)
M3 Washer ? 2(Φ3xΦ8x1mm)
M4 Set screw ? 1(M4x4mm)
Socket button head screw ? 2(M3x8mm)

Lots of others have bought this item along with the item that you are currently reading about.

700 Tail Rotor Hub H70T002XX

Use for T-REX 700E/700N/800。
Must with: 700 Tail Rotor (H70T001XXW)

Requirements:
700 tail rotor center x 1
Tail rotor washer(Φ8xΦ10x0.3mm) x 4
Washer(Φ3xΦ8x1mm) x 2
M4 set screw x 2(M4x4mm)
Socket collar screw x 2(M3x8mm)
Weight:27.19g

Here is another item that compliments the item being talked about.

Lipo 3300MAh 22.2V 35C - Ultra Power Series

Pulse Batteries – Can You Feel the Power?

Pulse Ultra batteries bring a brand-new level of power to the RC scene, based upon cutting edge lithium polymer technology, and taking advantage of all the technological gains within this amazing industry. Pulse is about power & performance at an expense that can be paid for. No more does premium power come at a premium cost – Pulse delivers everything in one pulse speeding up punch.

Delivering extreme power for your RC applications, Pulse batteries deliver everything you could imagine at a price never ever seen. Contributing to the addictive power of Pulse Ultra batteries is the 5C charge rate, permitting you to recharge in quick succession, leaving previous 1C LiPo batteries back at the charger as you rip through the skies above.

Ranging from 35C, 45C, and mind blowing 65C discharge rates, Pulse has you covered in every method possible, delivering mind numbing power levels that will take your flight to a completely brand-new level of extreme. If you're searching for power, you just found it. Pulse delivers extreme power for extreme pilots, when it pertains to value, Pulse just cannot be beat.
Feel the pulse, and get a brand-new Pulse Ultra Battery for your 3D demands!


Requirements:
Voltage: 22.2V
Cell Count: 6S
Capacity: 3300mAh
Discharge Rate: 35C
Measurements: 137mm x 42.25mm x 42.50mm (LxWxH)
Weight:
Balance Tap: JST-XH


Item Note:
Pulse batteries do not come with power leads, and will need the end user to solder their own style of battery connector for the battery to be appropriately utilized. Pulse batteries include bare leads covered with heat diminish security, and are prepared for the connector of option to be soldered to the positive/negative leads.