Align 600PRO MAIN GEAR CASE SET

Usage for T-REX 600E PRO/600EFL PRO.
Use with H70020,H60198,H60199?

Specifications:
One-way bearing HF1216 x 1(?12x?18x16mm)
Main gear case x 1
Hex socket salf tapping screw x 6(T3x6mm)
One-way bearing shaft x 1(?9x?12x34.7mm)
Washer x 1(?11.5x?18x0.8mm)

This item is regularly bought with the above mentioned item.



This item is regularly bought with the above mentioned item.

90mm Carbon Fiber Tail Blade Set (2) (550)

This is a replacement Align 90mm Carbon Fiber Tail Blade Set, and is
intended for use with the T-Rex 550 helicopter.

Functions:

3K carbon fiber material
Shape: In proportion wing
Length: 90mm
Width: 4.9mm
Shaft Size: 3mm
Weight: 9g/set




Here is a wonderful item that several others have actually bought at the very same time.

Bearing(6701ZZ)

Usage for T-REX 550E/600/600 Nitro。
Usage for 600 Torque Tube Drive Assembly.

Specifications:
Bearing 6701ZZ x 4(Φ12xΦ18x4mm)

You will enjoy this product if you have the product above stated.

131T M0.8 Autorotation Tail Drive Gear

This is a replacement Align 131 Tooth M0.8 Autorotation Tail Drive Gear, and is intended for use with the Align 550, and 600E Pro.






This item is regularly bought with the above mentioned item.

M0.8 Torque Tube Front Drive Gear Set (34T)

This is an Align M0.8, 34 Tooth Torque Tube Front Drive Gear Set, and is intended for use with the Align T-Rex 550 V2 and 600 Pro helicopters.
Includes:
(1) Modulus: 0.8 Front drive gear assembly (4x4.5x51mm)
(1) Front umbrella gear (20T) (21.2x33.6mm)
(1) Tail umbrella gear (20T) (21.2x12.5mm)

Note: In order to use this torque tube drive gear set on a T-REX 550, the helicopter must be equipped with the slanted gear setup. To determine if your helicopter utilizes slanted gears or straight-cut gears, observe the primary drive gear which will either have actually slanted or straight-cut teeth.



Often bought with the item that you are presently reading about.

520 Carbon Fiber Blade Set (550E)

This is an optional Align 520mm Carbon Fiber Main Blade Set, and is intended for use with the Align T-Rex 550 helicopter.


Requirements:

Shape: In proportion wing

Length: 520x48x6.5mm

Width: 12mm

Shaft Size: 4mm

Weight: 200g/set