Align 500PRO Main Shaft

Use for T-REX 500E PRO / 500EFL PRO.

Specs:
Main shaft x 2
Socket collar screw x 2(M2.5x19mm)
M2.5 nut x 2
Weight:43.9g

Get this thing to improve the one you read about.

Feathering Shaft

Specs:
Feathering shaft x 2(Φ5xΦ6x76.2mm)
Feathering shaft washer x 2(Φ3xΦ10x1mm)
Socket screw x 2(M3x10mm)

This thing is regularly bought with the above discussed thing.

Slant Thread Main Drive Gear/134T

Suitable for all 500 class makers.
Should with:Motor Pinion Helical Gear 12T(H50168)

Specs:
CNC M0.7 Slant Thread Main drive gear(134T) x 2

Below is a fantastic thing that lots of others have bought at the exact same time.

Tail Boom

Specs:
Tail boom x 2(Φ15xΦ16x461mm)
Tail control guide x 2
Rudder control rod x 1(Φ1.96x406mm)
Ball link x 2

Often bought with the thing that you are presently checking out.

Bearing (MR688ZZ)

Use for bearing block.
Specifications:
Bearing MR688ZZ x 2(Φ8xΦ16x5mm)

Below is a fantastic thing that lots of others have bought at the exact same time.

500PRO Landing Skid

Use for T-REX 500E PRO / 500EFL PRO.

Specs:
Landing skid x 2
Weight:38.7g

Below is another thing that compliments the thing being gone over.

500PRO Slant Thread Main Drive Gear (2) (134T)

This is a replacement Align 134 Tooth Slant Thread Main Drive Gear, and is meant for usage with the Align T-Rex 500E, 500ESP, 500E PRO and 500EFL PRO.
Must usage with:
Helical Cut Motor Pinion Gear (AGNH50168, or AGNH50179)
Weight: 50.4g
Includes:
(2) CNC M0.7 Slant Thread Main drive gear (134T)