Align 450 Swashplate Leveler

Use for T-REX 450 all class maker.

Requirements:
Swashplate system corrector ? 1
M3 Set screw ? 1(3x3mm)

Right here is a wonderful item that many others have purchased the exact same time.

AP800 Digital Pitch Gauge

This is the Align AP800 Digital Pitch Gauge. Established by Align's R&D team, the AP800 digital pitch gauge is ideal for flybar and flybarless helicopters and features an auto-detecting Horizontal level, and the outcomes are shown through a high contrast LCD screen, providing a basic and precise way to measure pitch angles.
Features:
Auto-detecting Horizontal level.
Uses backlighting LCD monitor.
No and Lock function.
Noticeable pitch range: -90? ~ 90?.
Automatic screen rotation.
Suitable for 200~800mm primary blades.
Build-in energy conserving function, power shuts down after 3 minutes without any movement.
Specifications:

Body Measurement: 108x53.9x16mm

Suitable blade width: 20mm~74mm

Noticeable pitch range: ?90?

Resolution: 0.1?

Battery: 2x CR 2032 Lithium

Weight: 38g (including battery)

Right here is a wonderful item that many others have purchased the exact same time.

Hexagon Screw Driver

Using on heli's M2 socket screw and M3 socket screw!

Requirements:
1.5mm(Black/26.6g)x1
2.0mm(Blue/28.6g)x1
2.5mm(Purple/29.5g)x1
3.0mm(Red/31g)x1

Right here is an additional item that praises the item being reviewed.

EC3 Device & Battery Connector


Features



Efficient in 60 constant ampsErgonomically pleasing and easy to gripProtected to avoid shorting and reverse polaritySuperior innovation fit to today's sophisticated applicationsConnectors are factory-installed with ParkZone® F-27C Stryker, E-flite PNP aircraft,Designed with convenience and reliability in mind




Introduction


E-flite's top quality EC3 connectors and leads should be a staple for each workbench. EC3 (E-flite Port 3.5mm) connectors, leads with connectors, and devices are best for electric power applications and deal with any battery, charger, ESC, Power Meter, etc.

Want an additional wonderful item to match the above mentioned item?

Castle Bec 10Amp (25 Volt Max Input)

This is the CC BEC 10A Receiver Battery Eliminator by Castle Creations.

FEATURES:
Eliminates the need for a receiver and servo battery pack
Draws higher voltage from the motor batteries and drops it to a
    voltage level ideal for the receiver and servos

INCLUDES:
One CC BEC receiver battery remover

NEEDS:
Installation in the aircraft

SPECS:
Length: 1.2" (30mm)
Width: .6" (15mm)
Height: .4" (10mm)
Weight: .4oz (11g)
Input voltage: 5V to 25.2V (2S to 6S LiPo)
Present output: 12 volts input = 7 amps* constant, 10 amp peak;
    24 volts input = 5 amps* constant, 7 amp peak
    *Ratings are determined with a 5mph air flow on the BEC
Selectable Output: 4.8 - 9.0V via the Castle Link (sold independently)
    Default voltage is 5.1V

This item praises the main item below.



This is a Tube of JB Weld Medium Threadlocker.

FEATURES:
Temperature level resistant to 300°F
Perfect for 1/4 - 1" fasteners
OEM authorized

INCLUDES:
6mL tube of threadlocker

SPECS:
Weight: .20 fl oz. (6mL)

This item praises the above reviewed item.

Feathering Shaft

Use for T-REX 450 Pro/Sport/Sport V2.
Specifications:
Feathering shaft x 2
Washer x 2(Φ2xΦ6x0.6mm)
Aluminum collar x 2(Φ4xΦ5.6x1mm)
Socket screw x 2(M2x6mm)