Align 3S1P Li-Poly Battery 40C (11.1V/2250mAh)

This is an Align 3S1P, 40C, 2250mAh Li-Polymer Battery, and is planned for usage with the Align T-REX 450 line of helicopters, along with other application that requires a battery of these specifications.

Features: It includes high effective and high discharge, and a inspection maker is used to match packs
Ideal for T-Rex 450 series


Advise to release the battery within 80% of rated discharge, keep 90% capability when over 100 cycles, keep 85% capability when over 150 cycles.(The cycle life and effectiveness will minimize due to high existing, high temperature and over-discharge)

Specifications:

Max Continuous Discharge: 40C

Rupture Discharge: 50C

Nominal Operating Temperature level: Approx. 40-64?C (104-147?F) (within 80% of rated discharge)

Maximum Temperature level: 80?C (176?F)

Output: 11.1V(3S1P)2250mAh 

Dimension: 34x106x24mm

Weight: 170g (not consisting of connectors)

Keep in mind: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capability can't exceed 80% of limit capability of the pack after complete charging to ensure a great cycle performance. It is recommended to completely charge a brand name brand-new battery prior to using and only release the battery 50% for first 5 cycles. Always keep an eye on race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not utilize the battery that has too low a voltage.



Do not expose batteries to sunshine or store/charge batteries at the temperature above 35?C or in a closed automobile. The high temperature environment could trigger damage to the pack or make it burst. If the battery becomes hot while quick charging, high existing discharging or racing, do not charge the battery till it has cooled completely. Wait about 20 minutes, then examine prior to recharging.