Align 3S1P Li-Poly Battery 40C (11.1V/2250mAh)

This is an Align 3S1P, 40C, 2250mAh Li-Polymer Battery, and is planned for usage with the Align T-REX 450 line of helicopters, as well as any other application that requires a battery of these specifications.

Features: It includes high efficient and high discharge, and a inspection device is utilized to match packs
Ideal for T-Rex 450 series


Recommend to release the battery within 80% of ranked discharge, keep 90% capacity when over 100 cycles, keep 85% capacity when over 150 cycles.(The cycle life and effectiveness will lower due to high existing, heat and over-discharge)

Requirements:

Max Continuous Discharge: 40C

Burst Discharge: 50C

Small Operating Temperature: Approx. 40-64?C (104-147?F) (within 80% of ranked discharge)

Optimum Temperature: 80?C (176?F)

Output: 11.1V(3S1P)2250mAh 

Measurement: 34x106x24mm

Weight: 170g (not consisting of ports)

Keep in mind: When utilizing high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will lead to over heated batteries. Releasing capacity can't go beyond 80% of the max capacity of the pack after full crediting ensure a great cycle performance. It is suggested to completely charge a brand new battery prior to utilizing and just release the battery 50% for very first 5 cycles. Constantly monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not utilize the battery that has too low a voltage.



Do not expose batteries to sunshine or store/charge batteries at the temperature level above 35?C or in a closed automobile. The heat environment might cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high existing discharging or racing, do not charge the battery till it has actually cooled totally. Wait about 20 mins, then examine prior to charging.